Case sizing die
Standard 7/8"x14 threaded dies
Cartridge Specifications
Base diameter - .562" maximum
Case length - 1.345" to 3.400"
Bullet diameter - .172" to .501"
$250 setup fee + $23.00 for sizing die
Neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.
Cartridge Specifications
Base diameter - .562"
Case length - 1.345" to 3.400"
Bullet diameter - .172" to .375"
$75.00 for neck sizing die
Large Series 1 1/4"x12 threaded dies
Classic Cast Press # 90998 or If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.
Cartridge Specifications
Base diameter - .562" to .800"
Bullet diamter - .375" to .600"
Case length - 2.000" to 4.000"
$350 setup fee + $75.00 for sizing
Neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.
Cartridge Specifications
Base diameter - .562" to .800"
Bullet diamter - .375" to .600"
Case length - 2.000" to 4.000"
$150.00 for neck sizing die
Custom Full Length Sizing Die
Custom 7/8"-14 Full Length Size Die Only.
Current lead time is 12 weeks.
Custom Full Length Sizing Die Setup Charge
Full Length Sizing Die only setup charge for 7/8-14 dies.
Custom Neck Sizing Die only
Neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.
Please indicate required fields below. You will need a fired piece of brass to measure. For assistance in determining the dimensions, please view this document. View cartridge listing for shell holder assignment, view list here.
If you need assistance populating dimensions, please mail your two fired cases and sample bullet into the factory to the address below, we can then measure and place the order for you.
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027
Custom Large Series Full Length Sizing Die
Large Series Full Length Sizing Die Only (1¼ -12 thread)
Custom Large Series Full Length Sizing Die Setup Charge
SETUP CHARGE
Large Series Full Length Sizing Die ( 1¼ -12 thread)
Custom Large Series Neck Sizing Die only
Custom Collet Neck sizing die 1 1/4x12" (large series) thread.