Most cartridges can be produced on a custom basis. Please allow 6 weeks for delivery.

Custom Micrometer Bullet Seating Die

If your cartridge falls within the following parameters it will fit the standard 7/8" x 14 die:

• Body diameter .562" maximum
• Bullet diameter .172" to .501"
• Case length 2.850" maximum

Custom Large Series Bullet Seating Die

Cartridges over the maximum in any of the above three parameters will probably fit into our Large Series Die.

Large series dies must be used in a Classic Cast Press # 90998 or If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.

If your cartridge falls within the following parameters it will fit the 1 1/4"-12 die:

• Body diameter .640" maximum
• Bullet diameter .300" to .600"
• Case Length over 2.500"

Note: The Large Series Bullet Seating die will NOT ship as a Micrometer bullet seating die.

Please mail in two fired and sized pieces of brass and a sample bullet for development and testing to:

Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027