Click here to view parts

Lee 6.5 PRC Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersize decap mandrel sold separately.

Lee 400 Legend Pistol 3-Die Steel Set includes Steel Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, and instructions. Select this die set if you are reloading mixed range brass.

Note:  load data is not yet available for this new cartridge. Contact your favorite powder manufacturer for data.

Click here to view parts

Collet style factory crimp die is sold separately.

Double ended undersized flash hole universal decapping pin for our Universal Decapping Die (#90292) or Undersize Flash Hole Universal Decapping Die (# 91976). Pin diameter .055"

5 case feed tubes automate the case feeding operation on the APP, Deluxe APP, Pro 1000, Pro 4000 Kit | Auto Breech Lock Pro, Load-Master, and Six Pack Pro presses. Increases rates and has been optimized for bottleneck cartridges.

Click here to view parts

Includes red anodized swivel adapter, powder hopper, valve and screw.

Note:  Classic Turret and Classic Cast presses purchased prior to year 2023 will need updated 10 degree lever clamp and 10 degree lever sleeve.

Upgrade your Six Pack Pro, Classic Turret Press or Classic Cast ball grip to an ergonomic hardwood roller handle grip.

Click here to view parts

Produces a .501 diameter 350 grain bullet

Handles included

click here to view parts

Press only includes:

• 5 hole turret
• Safety Prime- small and large primer arms and feeds
• Bin and bracket to catch completed rounds
• Roller handle grip
• Caliber change wrench
• Through ram primer disposal tube

Click here to view parts

Click here to view parts

Click here to view parts

Bullet Overall Length = .970 inches.

Distance from bullet nose to the top edge of the first driving ring = .530 inches.

270 Winchester to 7mm Rem Mag. Bullet diameter range .275" to .290".

Works with medium magazine.

Click here to view parts

Click here to view parts

Lee 22 Creedmoor Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

<-   Large Caliber rifle micrometer adjust screw works with all 35 cal. straight wall rifle cartridges that use this style bullet seating plug.

<-   Rifle micrometer adjust screw works with 34 caliber and smaller rifle cartridges that use this style bullet seating plug

<-   Handgun micrometer adjust screw works with handgun cartridges that use this style bullet seating plug

Deluxe Case Conditioning Combo includes cutter and lock stud, chamfer tool, primer pocket cleaner and power grip shell holder. If purchased separately, $23.94 value. 

Order the appropriate case length gauge and Auto Prime or Auto Bench Prime to complete this kit.

New for 2025

Lee Commercial Mold Handles fits Lee 6-Cavity and 18-Cavity Bullet Molds. Includes molded storage box for your handles and mold assembled, and your bullet sizing die.