Case Length Gauge/Holder

While we manufacture a full line of case length gauges for handgun cartridges, it is not normally necessary to trim handgun cases. These are made for those who are very concernered about overall case length with their handgun cartridges. If you are using light to moderate loads, generally the case will wear out before it needs to be trimmed. If you are using heavy loads or are a person who demands absolute uniformity, the handgun case lenth gauge would be applicable for you.

Standard Case Length Gauges

RIFLE CARTRIDGE	RIFLE CARTRIDGE	RIFLE CARTRIDGE	PISTOL CARTRIDGE
5.7 x 28 FN	270 WIN	300 WIN MAG	32 Smith & Wesson Long
22 Hornet	270 WSM	300 WHBY MAG	9mm Makarov
218 Bee	284 WIN	303 British	9mm Luger
221 Fireball	7 x 57 Mauser	32 Win Special	38 Super
222 REM	7mm/08	32/20 W.C.F.	380 Auto
223 REM	7mm Express/280 Rem.	7.7 Japanese	38 Smith & Wesson
223 WSSM	7mm REM MAG	8 x 57 Mauser	38 Special
22/250	7mm WSM	8x56 Hungarian-Mannlicher	38-55
220 Swift	7 x 64 Brenneke	325 WSM	357 MAG
243 WIN	7.5 Swiss (Schmidt-Rubin)	338 Fed	40 S&W
243 WSSM	7.5 x 54 MAS	338 Lapua	10mm Auto
6mm REM (244 Rem.)	7.62 x 39 Russian	338 WIN MAG	41 MAG
25/20 W.C.F.	7.62 x 54 Russian	35 REM	44/40
25 WSSM	7.65 Mauser (Belgian-Arg.)	35 Whelen	44 Special
250 Savage (250/3000)	30 M1 Carbine	375 WIN	44 MAG
257 Roberts	30/30 WIN	375 H&H or 375 Ultra Mag	45 ACP
25/06 REM	30/40 Krag	444 Marlin	45 Colt
6.5 Carcano	300 AAC Blackout	450 Marlin	454 Casull
6.5 x 55 Mauser	300 Savage	45/70 Government
6.5 x 284 Win	300 WSM	458 Win Mag	460 S&W
6.5 Creedmoor	308 WIN	* 50 BMG ($20.00)	* 480 Ruger
260 Remington	30/06 Springfield		* 500 S&W
6.8 REM SPC	300 H&H / 300 Rem. Ultra Mag	* Requires Large Cutter	* Requires Large Cutter

Custom Case Length Gauge Overruns Available for Immediate Shipment

RIFLE CARTRIDGE	RIFLE CARTRIDGE	RIFLE CARTRIDGE	HANDGUN CARTRIDGE
26 Nosler	338/06	6 x 47 Lapua	32 ACP
28 Nosler	340 Weatherby Magnum	6mm Creedmoor	32 H&R MAG
219 Zipper	348 Winchester	6mm TCU	32 S&W
222 Rem Mag	350 Rem Magnum	6mm XC	327 Federal Magnum
224 Valkyrie	350 Legend	6.5 PRC	357 Max
225 Win. Mag.	358 Winchester	6.5 Grendel	357 SIG
240 Weatherby Mag	375 Ruger	6.5-06 A SQUARE	38 Short Colt
25-35 Win	375 Super Mag	6.5 x 47 Lapua	45 GAP
257 Weatherby Mag	375 Socom	6.5 x 50 Japanese	50 Action Express (AE)
264 Winchester Mag	38-40 Win	6.5x57 Mauser	7.62 x 25 Tokarev
270 Weatherby Mag	40-65	7mm BR
280 Ackley Improved	416 Rigby	7mm STW
30 Herrett	416 Ruger	7mm Rem. Ultra Mag
30/284	45/70 LeverRevolution	7mm Weatherby Mag
30/378	450 Bushmaster	7.35 Carcano
308 Marlin Express	458 Lott	7.62 x 40 Wilson Tactical
308 Norma Mag	458 Socom	7/30 Waters
32-40 Win	50 Beowulf	8mm Remington Mag
338 Rem Ultra Mag	6mm BR Norma or Remington	8 x 68mm S
338 Edge	6mm PPC	8.6 Blackout
6 x 45		9.3 x 62
		9.3 x 74

For sizes not listed, order a custom cartridge here. Current lead time for Custom Case Length Gauges is approximately 8 weeks.

Custom case length gauges can be made for cartridges that fit an existing shell holder. We will need to know the desired trim length, and either the bullet diameter or a couple sized sample cases.

While there is really no maximum caliber, the smallest we can make is .22. We can not make anything in 17 cal or 20 cal because it is too small for our cutter to trim. Check out our Quick Trim Case Trimmer system for these smaller cartridges.

UNABLE TO PRODUCE

17 Ack Hornet - too small (Please see our Quick Trim Solution)
17 Rem - too small (Please see our Quick Trim Solution)
19 Calhoon - too small (Please see our Quick Trim Solution)
204 Ruger - too small (Please see our Quick Trim Solution and 204 Ruger Quick Trim Die)
43 Spanish - no knurled shell holder available (Please see our Quick Trim Solution and 43 Spanish Quick Trim Die)
45 Auto Rim- no knurled shell holder available
416 Barrett - no knurled shell holder available
450/400 3" Nitro Express - too large
470 Nitro Express - too large
500/450 Nitro Express - too large
577/450 Martini Henry - no knurled shell holder available
50 Sharpe - too large
577 BP Express - too large
40 Hanes - no knurled shell holder available
8mm Lebel - no knurled shell holder available (Please see our Quick Trim Solution and 8mm Lebel Quick Trim Die)

Order your custom case length gauge here

WARNING: Steel parts in this product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.