Thought I was finally done buying presses. Classic cast,APP, Pro4000. Then you just had to bring out an unbelievable inline bullet feed. Not enough holes in my ABLP. Ok so I spring for a new Pro 6000. What did I learn. That tiny little spring loaded gate on the 5 tube case loader made me put all my other case feed gizmos on the shelf. Sure wish you’d just sell the gate mechanism so I could resurrect my 4 tube loaders and not have to keep moving this one back and forth
Mark|8/20/2025 8:20 PM
Was this review helpful?YesNo (0/0)
5 tube universal case feed w/collator
5
I ordered one of these kits from Titan Reloading and wanted to applaud you on this item !! I installed it on my APP press and ran some 9mm brass through it as a test. It performed flawlessly !! The spring loaded gate kept the brass from falling over, and it is a great addition to this unit !! I'm going to install it today on my Pro 4000 with some 223 brass as a test to see how it functions. I'm confidant it will perform just as well. Thanks for your time.
Doug|9/5/2024 8:59 AM
Was this review helpful?YesNo (0/0)
Universal 5-Tube Case Feeder and Collator Kudos
5
The new and improved 5-Tube Case Feeder with its little spring door and the new Collator is a vast improvement for the Lee APP.
The little spring-loaded door stops cases from escaping as they drop into the red claw shuttle. The collator, with its hole mask and diverter installed, allows every .357 Mag or .32 H&R Mag case to fall into the tubes base down, every time.
I literally can now decap on the APP as fast as I can pull the handle. A great little machine is now better than ever.
Thanks for the redesign improvement.
Daniel|6/21/2024 3:15 PM
Was this review helpful?YesNo (0/1)
Much better
5
Much better than the 4 tube. The feed gate is pure genius. Adjustments are more straightforward. Worked perfectly after initial install with no further adjustments or issues.