Lee Precision
30/40 Krag Factory Crimp Die
Click here to view parts
Lee 30/40 Krag Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
30/40 Krag Full Length Sizing 3-Die Set
Click here to view parts
Lee 30/40 Krag Pacesetter 3-Die Set includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
30/40 Krag Full Length Sizing Die
30/40 Krag Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
300 AAC Blackout Breech Lock 3-Die Set
Click here to view parts
Lee 300 AAC Blackout Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
300 AAC Blackout Case Length Gauge & Shell Holder
Trim to length 1.348 to 1.368 inches.
Lee 300 AAC Blackout Case Length Gauge
