Rifle Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
Handles and sprue plate are included.
Hollow Base Molds
Available in single cavity only. Self-centering automatic core pin for the fastest possible molding. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
22 Caliber Molds
6.5mm Molds
30 Caliber Molds
7.62 x 39 Molds
45-70 Caliber Molds
50-70 CAL Molds
379-250-RF Double Cavity Mold
Click here to view parts
Produces a .379 diameter 250 grain round with flat nose bullet.
Handles included.
Bullet Overall Length = .925 inches.
Distance from crimp groove to the nose of the bullet = .412 inches.
418-320-RF Double Cavity Mold
Click here to view parts
Bullet Overall Length = .970 inches.
Distance from bullet nose to the top edge of the first driving ring = .530 inches.
457-340-F Double Cavity Mold
Click here to view parts
Produces a .457 diameter 340 grain Flat nose bullet
Handles included.
Bullet Overall Length = .862 inches.
Distance from crimp groove to the nose of the bullet = .440 inches.
457-405-F Double Cavity Mold
Click here to view parts
Produces a .457 diameter 405 grain Flat nose bullet
Handles Included
Bullet Overall Length = 1.040 inches.
Distance from crimp groove to the nose of the bullet = .440 inches.
457-450-F Double Cavity Mold
Click here to view parts
Produces a .457 diameter 450 grain flat nose bullet.
Handles included.
Bullet Overall Length = 1.205 inches.
Distance from nose of the bullet to the first lube groove = .605 inches.
459-405HB Single Cavity Mold
Click here to view parts
Produces a .459 diameter 405 grain round nose bullet.
Handles included.
Bullet Overall Length = 1.100 inches.
Distance from nose of the bullet to the first lube groove = .480 inches.
459-500-3R Double Cavity Mold
Click here to view parts
Produces a .459 diameter 500 grain round nose bullet.
Handles Included
Bullet Overall Length = 1.415 inches.
Distance from nose of the bullet to the first lube groove = .685 inches.
515-450F Double Cavity Mold
Click here to view parts
Produces a .515 diameter 450 grain round nose.
Handles Included.
Bullet Overall Length = .985 inches.
Distance from nose of the bullet to the first lube groove = .505 inches.
515-500F Double Cavity Mold
Click here to view parts
Produces a .515 diameter 500 grain round nose bullet.
Handles Included.
Bullet Overall Length = 1.050 inches.
Distance from nose of the bullet to the first lube groove = .464 inches.
C225-55-RF 6 Cavity Mold
Click here to view parts
Produces a gas checked .225 diameter 55 grain round with flat bullet.
Bullet Overall Length = .580 inches.
Distance from bullet nose to the top edge of the first driving ring = .335 inches.
- 1
- 2