The Automatic Processing Press is your first choice for primer pocket swaging, bullet sizing and single stage reloading.
The APP gets its speedy operation in part by the use of the X-press shell holder. The shell holder allows the case to pass through the shell holder after the operations are performed. The X-press shell holders are sold separately.
Lee single stage presses all have compound leverage, which permits full length sizing the largest magnum cases with ease. All have built in spent primer catchers and tough powder coat finish. Breech Lock quick change feature standard on all presses, change dies instantly with a twist of the wrist. Individual detailed instructions accompany each press.
Make your selection according to need--based on price, speed and convenience. For even greater bargains, consider a reloading kit.
CHANGE DIES INSTANTLY WITH A TWIST OF THE WRISTBreech Lock Bushings, Spline Drive Bushings, and Smart Lock BushingsBig Gun Inspired Breech Lock Quick Change feature allows you to switch dies with a 1/6 of a turn rather than fourteen or more turns. Loading with a Breech lock equipped press is convenient as a Turret press when loading small quantities of ammuniton. Interrupted three-start thread assures dies will return and lock into the exact same position. If cost is more important than convenience, you can leave the Breech Lock bushing locked in the press and screw dies in and out like a conventional press. |
Single Station Presses will load nearly any cartridge. Cartridges are loaded in a batch process--for example, 20 cases are de-primed and sized, charged, then bullet seated. This die changing process is sped up by the Lee Breech Lock Quick Change System. Rifle case reloading is best accomplished on a single station press. For a beginner, a single station press in a kit is the best value.
Select Breech Lock Reloader Press or Breech Lock Challenger Press for all cartridges up to the 460 Weatherby Mag.
Select Classic Cast Press for all cartridges up to the 50 BMG.