Lee Precision

Lee .306 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.

Lee custom over-run .377 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.

Use in conjunction with the Breech Lock Bullet Sizer Kit. Fits any Breech Lock enabled reloading press. Lee Liquid Alox, a reloading press and the Breech Lock Bullet Sizer Kit are required to utilize this kit, each sold separately.

Lee .409 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.

Lee complete shotgun shell reloading tool with 24 shot and powder bushings. Loads 2 3/4" and 3 inch shells. Nothing else required. Includes mounting hardware to fasten to workbench.

LEE Load-All II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns. You can load just as fast as with any other brand of loader costing up to $200.

Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers - and they're not as accurate as those made by Lee. Only Lee supplies molded bushings.

This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out. 

Features:

• Capable of reloading 200 shells per hour
• Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
• Built-in primer catcher with an easy-to-empty door right up front
• Recesses at every station for speedy shell positioning
• Easy and economical gauge conversion
• Adjustable from the standard 2 3/4 shell, up to 3 inch shell

Note: this press cannot load 2 1/2" or 3 1/2" shot shells

Click here to view parts

Lee complete shotgun shell reloading tool with 24 shot and powder bushings. Loads 2 3/4" and 3 inch shells. Nothing else required. Includes mounting hardware to fasten to workbench.

LEE Load-All II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns. You can load just as fast as with any other brand of loader costing up to $200.

Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers - and they're not as accurate as those made by Lee. Only Lee supplies molded bushings.

This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out. 

Features:

• Capable of reloading 200 shells per hour
• Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
• Built-in primer catcher with an easy-to-empty door right up front
• Recesses at every station for speedy shell positioning
• Easy and economical gauge conversion
• Adjustable from the standard 2 3/4 shell, up to 3 inch shell

Note: this press cannot load 2 1/2" or 3 1/2" shot shells

Click here to view parts

Click here to view parts

Lee 32 Winchester Special Micrometer Full Length 2-Die Set. Includes Full Length Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, powder measure and instructions with load data. Select this die set if you are reloading new and mixed range brass.

If you will be reloading for hunting, or your firearm magazine limits the overall length and prevents your bullet from touching the rifling, we recommend restoring accuracy with the accessory Lee Factory crimp die.