Lee Precision
45/70 Government Collet Necksizer
click here to view parts
Lee 45/70 Government Collet Neck Sizing Die uses a collet to squeeze case neck against a precision mandrel creating a precisely aligned case neck, while reducing run out. Sizes just the case neck and requires no case lubrication. Integrated Breech Lock quick change threading on exterior of die body, works with any Lee Breech Lock enabled reloading press. Select this die if you are reloading brass that has been fired through your gun only.
Benefits of neck sizing:
- No case lube required
- Best accuracy
- Steel collet squeezes fired case to precision mandrel
- Extended case life
45/70 Government Full Length Sizing Die
45/70 Government Steel Full Length Sizing Die Complete.
Click here to view parts
45/70 Government or 450 Marlin Factory Crimp Die
Click here to view parts
Lee 45/70 Government or 450 Marlin Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
This die is NOT compatible with 45/70 Hornady LEVERevolution cases. Please order 45/70 LEVERevolution Factory Crimp Die
45/70 GOVT Lee Loader
Click here to view parts
The Classic Lee Loader neck sizes only. This is not recommended for semi-auto, pump and lever action guns.
