Bullet Feed Kit

Note for Pro 4000 | Auto Breech Lock Pro owners:   presses require 1 steel breech lock bushing and 1 lock ring to mount to Bullet Feed Kit (items sold separately).

Automatically feeds bullets into the mouth of the bullet seating die. Align bullets more accurately than possible by hand and increases the cyclic rate 50 to 100%. The Bullet Feed Kit is complete for one bullet diameter and range of length. To determine which Bullet Feeder you need, you will need to measure the bullet's diameter and, most importantly, the length of the bullet in inches. To convert to another caliber or bullet length select appropriate Feed Die & Finger and purchase corresponding Lee bullet seat and feed die.

The tube holds 25 bullets. The kit comes with 2 tubes (small and large), when you load small bullets, the small tube fits inside the large tube. When you load large bullets, the small tube is removed.

The Multi-Tube Adapter accessory for the bullet feed kit will allow you to hold approximately 100 bullets.

The Bullet Feed Kit is available in the following bullet diameter's and length's only, click on your size for additional product descriptions. 

Please note, the bullets that work the best in the bullet feeder are jacketed or lead round nose flat base bullets.

Accessory:

Multi-Tube Adapter for Bullet Feed Kit