Rifle Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
Handles and sprue plate are included.
Hollow Base Molds
Available in single cavity only. Self-centering automatic core pin for the fastest possible molding. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
C225-55-RF Double Cavity Mold
Click here to view parts
Produces a gas checked .225 diameter 55 grain round with flat bullet
Handles included
Bullet Overall Length = .580 inches.
Distance from bullet nose to the top edge of the first driving ring = .335 inches.
C266-140-RF Double Cavity Mold
Click here to view parts
Produces a .266 Diameter, 140 Grain Round with flat bullet.
Handles included
C277-135-RF Double Cavity Mold
Click here to view parts
produces a gas checked .277 diameter 135 grain round with flat bullet.
Handles included.
Bullet Overall Length = .943 inches.
Distance from crimp groove to the nose of the bullet = .504 inches.
C285-130-R Double Cavity Mold
Click here to view parts
Produces a .285 diameter 130 grain round nose bullet.
Handles included.
Bullet Overall Length = .890 inches.
Distance from crimp groove to the nose of the bullet = .470 inches.
C309-113-F Double Cavity Mold
Click here to view parts
Produces a .309 diameter 113 grain round with flat nose bullet.
Handles included.
Bullet Overall Length = .623 inches.
Distance from nose of the bullet to the first lube groove = .175 inches.
C309-120-R Double Cavity Mold
Click here to view parts
Produces a gas checked, .309 diameter 120 grain round nose bullet.
Handles included.
Bullet Overall Length = .665 inches.
Distance from nose of the bullet to the first lube groove = .215 inches.
C309-150-F Double Cavity Mold
Click here to view parts
Produces a .309 diameter 150 grain flat nose bullet.
Handles included.
Bullet Overall Length = .833 inches.
Distance from crimp groove to the nose of the bullet = .413 inches.
C309-160-R Double Cavity Mold
Click here to view parts
Produces a .309 diameter 160 grain round nose bullet.
Handles included.
Bullet Overall Length = .900 inches.
Distance from crimp groove to the nose of the bullet = .480 inches.
C309-170 F Double Cavity Mold
Click here to view parts
Produces a .309 diameter 170 grain round nose bullet.
Handles included.
Bullet Overall Length = .950 inches.
Distance from crimp groove to the nose of the bullet = .530 inches.
C309-180-R Double Cavity Mold
Click here to view parts
Produces a .309 diameter 180 grain round nose bullet.
Handles included.
Bullet Overall Length = .958 inches.
Distance from crimp groove to the nose of the bullet = .538 inches.
C309-200-R Double Cavity Mold
Click here to view parts
Produces a .309 diameter 200 grain round nose bullet
Handles included
Bullet Overall Length = 1.068 inches.
Distance from crimp groove to the nose of the bullet = .648 inches.
C312-155-2R 6 Cavity Mold
Click here to view parts
Produces a .312 diameter 155 grain round nose.
Bullet Overall Length = .930 inches.
Distance from crimp groove to the nose of the bullet = .630 inches.
C312-155-2R Double Cavity Mold
Click here to view parts
Produces a .312 diameter 155 grain round nose bullet.
Handles Included.
Bullet Overall Length = .930 inches.
Distance from crimp groove to the nose of the bullet = .630 inches.
C312-185 1R Double Cavity Mold
Click here to view parts
Produces a .312 diameter 185 grain round nose bullet.
Handles included.
Bullet Overall Length = 1.015 inches.
Ballistic Coefficient = 0.247
Distance from crimp groove to the nose of the bullet = .595 inches.
C324-175 1R Double Cavity Mold
Click here to view parts
Produces a .324 diameter 175 grain round nose bullet.
Handles included.
Bullet Overall Length = .958 inches.
Distance from crimp groove to the nose of the bullet = .538 inches.
C330-205-1R Double Cavity Mold
Click here to view parts
Produces a .330 diameter 205 grain round nose bullet
Handles included.
Bullet Overall Length = 1.039 inches.
Distance from nose of the bullet to the first lube groove = .564 inches.
C338-220-1R Double Cavity Mold
Click here to view parts
Handles included.
Bullet Overall Length = 1.035 inches.
Distance from nose of the bullet to the first lube groove = .560 inches.
C457-500-F Double Cavity Mold
Click here to view parts
Produces a gas checked, .457 diameter, 500 grain, flat nose bullet.
Bullet overall length = 1.205 inches
Distance from nose of the bullet to the first lube groove = .605 inches.
Handles included.
CTL312-160-2R 6 Cavity Mold
Click here to view parts
Produces a gas checked .312 diameter 160 grain round nose bullet.
Bullet Overall Length = .960 inches.
Distance from crimp groove to the nose of the bullet = .653 inches.
CTL312-160-2R Double Cavity Mold
Click here to view parts
Produces a .312 diameter 160 grain round nose bullet.
Handles included.
Bullet Overall Length = .960 inches.
Distance from crimp groove to the nose of the bullet = .653 inches.
TL309-230-5R Double Cavity Mold
Click here to view parts
Produces a .309 Diameter, 230 Grain, 5 Ogive Radius bullet.
Handles included
300 AAC Blackout, Best subsonic. Requires Fast Twist Rifling.
Bullet Overall Length = 1.363 inches.
Distance from crimp groove to the nose of the bullet = .880 inches.