Lee Precision

Lee complete shotgun shell reloading tool with 24 shot and powder bushings. Loads 2 3/4" and 3 inch shells. Nothing else required. Includes mounting hardware to fasten to workbench.

LEE Load-All II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns. You can load just as fast as with any other brand of loader costing up to $200.

Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers - and they're not as accurate as those made by Lee. Only Lee supplies molded bushings.

This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out. 

Features:

• Capable of reloading 200 shells per hour
• Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
• Built-in primer catcher with an easy-to-empty door right up front
• Recesses at every station for speedy shell positioning
• Easy and economical gauge conversion
• Adjustable from the standard 2 3/4 shell, up to 3 inch shell

Note: this press cannot load 2 1/2" or 3 1/2" shot shells

Click here to view parts

Lee complete shotgun shell reloading tool with 24 shot and powder bushings. Loads 2 3/4" and 3 inch shells. Nothing else required. Includes mounting hardware to fasten to workbench.

LEE Load-All II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns. You can load just as fast as with any other brand of loader costing up to $200.

Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers - and they're not as accurate as those made by Lee. Only Lee supplies molded bushings.

This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out. 

Features:

• Capable of reloading 200 shells per hour
• Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
• Built-in primer catcher with an easy-to-empty door right up front
• Recesses at every station for speedy shell positioning
• Easy and economical gauge conversion
• Adjustable from the standard 2 3/4 shell, up to 3 inch shell

Note: this press cannot load 2 1/2" or 3 1/2" shot shells

Click here to view parts

Click here to view parts

Lee 32 Winchester Special Micrometer Full Length 2-Die Set. Includes Full Length Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, powder measure and instructions with load data. Select this die set if you are reloading new and mixed range brass.

If you will be reloading for hunting, or your firearm magazine limits the overall length and prevents your bullet from touching the rifling, we recommend restoring accuracy with the accessory Lee Factory crimp die.

Click here to view parts

Lee 32 Winchester Special Micrometer Full Length 2-Die Set. Includes Full Length Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, powder measure and instructions with load data. Select this die set if you are reloading new and mixed range brass.

If you will be reloading for hunting, or your firearm magazine limits the overall length and prevents your bullet from touching the rifling, we recommend restoring accuracy with the accessory Lee Factory crimp die.

Lee 338 Remington Ultra Magnum Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Click here to view parts