Lee Precision

Click here to view parts

Lee 243 WSSM  2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.

LIMITED TIME ONLY, while supplies last: Get a FREE Rifle Bullet Seating Micrometer Adjust Screw with this die set! $20.00 value

If you will be reloading for hunting, or your firearm magazine limits the overall length and prevents your bullet from touching the rifling, we recommend restoring accuracy with the accessory Lee Factory Crimp die.

Click here to view parts

Lee 25 WSSM 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.

LIMITED TIME ONLY, while supplies last: Get a FREE Rifle Bullet Seating Micrometer Adjust Screw with this die set! $20.00 value

Click here to view parts

Click here to view parts

Lee 38 Special | 357 Magnum Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions with load data for 38 Special and 357 Magnum. Ultimate lock rings are installed on all dies.

Note:  You may use the 38 Special die set to reload for the 357 Magnum and 357 Maximum. You would have to back out the Powder Thru Expander Die, and the Bullet Seating and Crimping Die about 2 turns to compensate for the longer 357 Magnum case, additional adjustments needed for 357 Maximum. Load data for the 357 Max is available in Modern Reloading.

Click here to view parts

Lee 380 Auto Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.

Consider adding micrometer seater adapter, providing bullet seating capability to this reloading die, eliminating a step in the reloading process. Perfect for progressive or turret press users with limited stations, like our Pro 1000, Pro 4000, 4 hole turret or Dillon 550 and 750 customer's. Crimping, seating, and post sizing in one step. Free's up an extra station on your reloading press to install time saving accessories like our Lee Inline Bullet Feed Kit.

You have all these great benefits:

·      Uniform dead length bullet seating

·      Easy crimp adjustment, die is never moved after installation

·      Bullet seating depth is micrometer accurate

·      Cartridge is post-sized after seating and crimping

·      Saves an extra step.