Lee Precision
6.5 Carcano Dies
6.5 Carcano Factory Crimp Die LTD PROD
Lee 6.5 Carcano Factory Crimp Die (custom over-run) crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
6.5 Carcano Full Length Sizing 2-Die Set
Click here to view parts
Lee 6.5 Carcano Limited Production 2-Die Set includes a Full Length Sizing Die (for .264" bullets), Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
The original .268" bullet supply is limited, and requires an oversize easy x expander (sold separately).
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Please note: if you are using PPU Prvi Partizan brass, a #12 universal shell holder may be required for reloading.
6.5 Carcano Full Length Sizing Die
6.5 Carcano Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
.263" diameter easy x expander is installed. The original .268" bullet supply is limited, and requires an oversized expander, product 91857.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
6.5 Carcano LTD PROD QT Die
6.5 Carcano limited production quick trim die.
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.