Lee Precision
Factory Crimp Die
Factory Second 223 Rem/AR/5.56x45mm NATO Pacesetter Full Length Sizing 3-Die Set
Click here to view parts
Lee 223 Pacesetter 3-Die Set includes Full Length Sizing Die, Easy Adjust Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, powder measure and instructions with load data. Select this die set if you are reloading mixed range brass.
This die set may be used to load 5.56 NATO (5.56 x 45mm) brass. You must follow load data published for the 5.56 NATO, available from your favorite powder manufacturer.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Factory Second 444 Marlin Micrometer Full Length 3-Die Set
Click here to view parts
Lee 444 Marlin Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Easy Adjust Dead Length , Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Nothing helps accuracy more than uniform start pressure, that is, the level of pressure to begin the bullets travel down the bore. Bullet seating depth affects this important pressure. For best accuracy, seat the bullet so the Ogive is touching or nearly touching the rifling. If your firearm has a magazine that limits your seating depth and you are unable to touch the rifling with the bullet, restore accuracy with the accessory Lee Factory crimp die.
