Lee Precision

Click here to view parts

The Classic Lee Loader neck sizes only. This is not recommended for semi-auto, pump and lever action guns.

Click here to view parts

Lee 270 Winchester Breech Lock 3-Die Set includes colored quick change bushings for easy die identification, Full Length Sizing Die, Micrometer Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, powder measure and instructions with load data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.

Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.

270 Winchester Quick Trim Die

Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.

Click here to view parts

Lee 270 Winchester Short Magnum WSM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Lee 270 WSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Deluxe Case Conditioning Kit, Case Conditioning Kit, or Cutter and Lock Stud.

Trim to length 2.080 to 2.100 inches

Click here to view parts

1 REQ.