Closeouts
Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
FACTORY SECOND 5 Hole Ultimate Tool Carrier
Reconditioned - 6mm ARC Quick Trim Die
Click here to view parts
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
300 HAM'R Collet necksizing 2-Die Set
Click here to view parts
Lee 300 HAM'R collet die uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out. Includes collet necksizing die, easy adjust dead length bullet seating die, shell holder, powder dipper and instructions and load data. Select this die set if you are reloading brass that has been fired through your gun only.
Reconditioned - .324 Custom Bullet Sizer & Punch
Lee .324 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.
Reconditioned - Six Pack Pro shell plate 19L
SIX PACK PRO SHELL PLATE 19L works with the following cartridge: 10MM AUTO.
Reconditioned - Six Pack Pro Reloading Press (WHD - 11B)
Six Pack Pro reloading press only includes: Six Pack Reloading Press, small and large primer system, bin and bracket and 5 tube universal case feed magazine.
Click here to view parts
Click here for mounting plate/drill template
Reconditioned - Neck Sizer 223 Remington or 223 Ackley Improved
Click here to view parts
Lee 223 Remington or 223 Ackley Improved neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.
Undersized flash hole decap mandrel sold separately.
.002" undersize mandrel sold separately
Reconditioned - 44 Special/Magnum Carbide 4-Die Set
Click here to view parts
Lee 44 Special and 44 Magnum Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for both the 44 Special and 44 Magnum.
Note: These dies can be used to reload 44 Magnum and 445 Super Mag. Contact your favorite powder manufacturer for 445 Super Mag reloading data.