Closeouts
Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
FACTORY SECOND 5 Hole Ultimate Tool Carrier
Reconditioned - .324 Custom Bullet Sizer & Punch
Lee .324 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.
Reconditioned - 38 Super / ACP Carbide Factory Crimp Die
Click here to view parts
Lee 38 Super/38 ACP Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
Reconditioned - 308 Winchester Quick Trim Die
308 Winchester Quick Trim Die
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
Reconditioned - 45 ACP Breech Lock Carbide 3-Die Set (Smart Lock Bushings on all dies)
Click here to view parts
Lee 45 ACP Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Reconditioned - 44 Special/Magnum Breech Lock Carbide 3-Die Set (Smart Lock Bushings on all dies)
Click here to view parts
Lee 44 Special / 44 Magnum Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for both the 44 Special and 44 Magnum. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: These dies can be used to reload the 44 Magnum and 445 Super Mag. 44 Magnum reloading data may be purchased here, 445 Super Magnum load data would need to be obtained from your favorite powder manufacturer.
Reconditioned - 9.3x72 R Factory Crimp Die LTD PROD
Lee 9.3x72R Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
Reconditioned - 351 WSL Factory Crimp Die LTD PROD
Lee 351 Winchester Self Loading WSL Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
Reconditioned - 7MM Express / 280 Remington Full Length Sizing Die
7mm Express / 280 Remington Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Reconditioned - 7.62 Nagant Full Length Sizing Die
7.62 Nagant Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
Reconditioned - 12G LOAD-ALL NOBEL 2 3/4 (WH D7B)
Click here to view parts
Includes an extra white bushing** in .224 for Nobel powders, along with special notes and charge table for the Nobel bushing.
**Bushing not shown in photo
Reconditioned - APP Swage Kit (WH D11B)
Note: This product is for use in the Lee APP or Deluxe APP press only.
Spring assisted case extraction with integrated case guide.
Removes the military crimp from the primer pocket while swaging the primer pocket of your brass.
Leaves a nice smooth entry radius for new primer.
Easy to adjust
No shell holder required
Only adjustment necessary is to change primer size.
Includes swage push die, swage holder, push rod, small swage punch and large punch, and shell holder adapter.
Click here to view product instructions.
Click here to view parts.
Reconditioned - APP PRESS (WH D11B)
The Automatic Processing Press is your first choice for primer pocket swaging, bullet sizing and single stage reloading.
The APP gets its speedy operation in part by the use of the X-press shell holder. The shell holder allows the case to pass through the shell holder after the operations are performed. The X-press shell holders are sold separately.
Factory Second - Breech Lock Hand Press only (WH D11B)
The world's most popular hand press! More convenient than ever, includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Smart Lock Quick Change Bushing included.
Click here to view parts