Handgun Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
All molds for pistol calibers are double cavity to speed casting. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
32/20 / 32 S&W Long / 32 Colt NP Molds
38 Special / 357 Magnum
9mm / 38 Super Auto / 380 Auto Molds
40 S&W / 10mm Auto Molds
311-100-2R Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .311 diameter 100 grain round nose bullet.
Handles included
Ballistic Coefficient = .174
Bullet Overall Length = .578 inches
Distance from the bullet nose to the first lube groove = .298 inches
311-93-1R 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .311 diameter 93 grain round nose bullet
Ballistic Coefficient = .125
Bullet Overall Length = .509 inches
Distance from the bullet nose to the first lube groove = .229 inches
311-93-1R Double Cavity Mold
Click here to view parts
Produces a .311 diameter 93 grain round nose bullet.
Handles included
Bullet Overall Length = .509 inches.
Distance from the bullet nose to the first lube groove = .229 inches
356-102-1R 6 Cavity Mold
356-102-1R Double Cavity Mold
Click here to view parts
Produces a .356 diameter 102 grain round nose bullet
Handles included
Bullet Overall Length = .464 inches.
Distance from nose of the bullet to the first lube groove = .264 inches.
356-120-TC 6 Cavity Mold
Click here to view parts
Produces a .356 diameter 120 grain Truncated Cone nose bullet.
Bullet Overall Length = .555 inches.
Distance from nose of the bullet to the first lube groove = .280 inches.
356-120-TC Double Cavity Mold
Click here to view parts
Mold produces a .356 diameter 120 grain Truncated Cone nose bullet
Handles included
Bullet Overall Length = .555 inches.
Distance from nose of the bullet to the first lube groove = .280 inches.
356-125 2R 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .356 diameter 125 grain Round nose bullet
Bullet Overall Length = .565 inches.
Distance from nose of the bullet to the first lube groove = .345 inches.