Handgun Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
All molds for pistol calibers are double cavity to speed casting. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
MOLD DC 518-364-3R SMITH CARBINE NFS MARK HUBBS
MOLD DC 518-364-3R SMITH CARBINE NFS MARK HUBBS
TL314-90-SWC Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .314 diameter 90 grain Semi Wad Cutter nose bullet.
Handles included
Ballistic Coefficient = .100
Bullet Overall Length = .565 inches
Distance from the bullet nose to the top edge of the first driving ring = .220 inches
TL356-124-2R 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .356 diameter 124 grain Round nose bullet
Bullet Overall Length = .595 inches.
Distance from bullet nose to the top edge of the first driving ring = .314 inches.
TL356-124-2R Double Cavity Mold
Click here to view parts
Produces a .356 diameter 124 grain round nose bullet
Handles included
Bullet Overall Length = .595 inches.
Distance from bullet nose to the top edge of the first driving ring = .314 inches.
TL356-124-TC 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .356 diameter 124 grain Truncated Cone nose bullet
Bullet Overall Length = .580 inches.
Distance from bullet nose to the top edge of the first driving ring = .280 inches.
TL356-124-TC Double Cavity Mold
Click here to view parts
Produces a .356 diameter 124 grain Truncated Cone nose bullet
Handles Included
Bullet Overall Length = .580 inches.
Distance from bullet nose to the top edge of the first driving ring = .280 inches.
TL356-95-RF 6 Cavity Mold
Click here to view parts
Produces a .356 diameter 95 grain round nose bullet.
Bullet Overall Length = .405 inches.
Distance from the bullet nose to the first lube groove = .270 inches
TL356-95-RF Double Cavity Mold
Click here to view parts
Produces a .356 diameter 95 grain round nose bullet.
Handles included
Bullet Overall Length = .405 inches.
Distance from the bullet nose to the first lube groove = .270 inches
TL358-148WC 6 Cavity Mold
Click here to view parts
Produces a .358 diameter 148 grain Wad Cutter bullet.
Bullet Overall Length = .550 inches.
TL358-148WC Double Cavity Mold
Click here to view parts
Produces a .358 diameter 148 grain Wad Cutter nose bullet.
Handles included.
Bullet Overall Length = .550 inches.
TL358-158-2R 6 Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain 2 ogive radius bullet.
Ballistic Coefficient .207
Bullet Overall Length = .710 inches
Distance from the bullet nose to the top edge of the first driving ring = .245 inches
TL358-158-2R Double Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain round nose bullet
Handles included.
Ballistic Coefficient .207
Bullet Overall Length = .710 inches
Distance from the bullet nose to the top edge of the first driving ring = .245 inches
TL358-158-SWC Double Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain Semi Wad Cutter bullet.
Handles included.
Bullet Coefficient = .117
Bullet Overall Length = .650 inches
Distance from bullet nose to the top edge of the first driving ring = .275 inches
TL358-158SWC 6 Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain Semi Wad Cutter nose bullet.
Ballistic Coefficient .117
Bullet Overall Length = .650 inches
Distance from bullet nose to the top edge of the first driving ring = .275 inches
TL401-175-SWC 6 Cavity Mold
Click here to view parts
Produces a .401 diameter 175 grain Semi Wad Cutter nose bullet
Bullet Overall Length = .598 inches.
Distance from bullet nose to the top edge of the first driving ring = .250 inches.