Online Dealers Specialty Dealers Local Dealers Catalog Help Videos Instructions
You have no items in your shopping cart. close
Go to your saved Cartridges

30-06 Springfield Dies

1 review(s) | Add your review
  1. Picture of 30/06 Micrometer Full Length Die Set
    30/06 Micrometer Full Length Die Set
    SKU: 92373
    $46.98
  2. Picture of 30/06 Micrometer Neck Sizing Die Set
    30/06 Micrometer Neck Sizing Die Set
    SKU: 90715
    Availability: In stock
    $49.98
  3. Picture of Neck Sizer 30/06 Springfield
    Neck Sizer 30/06 Springfield
    SKU: 90960
    Availability: In stock
    $29.98
  4. Picture of 30/06 Springfield Factory Crimp Die
    30/06 Springfield Factory Crimp Die
    SKU: 90824
    Availability: In stock
    $15.98
  5. Picture of 30/06 Quick Trim Die
    30/06 Quick Trim Die
    SKU: 90291
    Availability: In stock
    $16.00
  6. Picture of 30/06 Full Length Sizing Die
    30/06 Full Length Sizing Die
    SKU: 91079
    Availability: In stock
    $23.00
Micrometer Necksizing 2-Die Set
Full-Length Sizing Die Set
Full-length Sizing Die
Factory Crimp Die
Neck Sizing Die
Quick Trim Die

Micrometer Neck Sizing 2-Die Set

Micrometer Neck Sizing 2-Die Set

Click here to view parts


Lee 30/06 Neck Sizing Die Set includes Neck Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, powder dipper and instructions with load data. Select this die set if you are reloading brass that has been fired through your firearm only.


Nothing helps accuracy more than uniform start pressure, that is, the level of pressure to begin the bullets travel down the bore. Bullet seating depth affects this important pressure. For best accuracy, seat the bullet so the Ogive is touching or nearly touching the rifling. If your firearm has a magazine that limits your seating depth and you are unable to touch the rifling with the bullet, restore accuracy with the accessory Lee Factory crimp Die.


Reloading brass with undersized flash hole? Undersize flash hole decap mandrel is available as an accessory.


Tighter bullet fit .002" undersize decap mandrel is available as an accessory.


WarningWARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go towww.P65Warnings.ca.gov

 

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Full-Length Sizing Die Set

Click here to view parts


Lee 30/06 Springfield Micrometer Full Length 2-Die Set. Includes Full Length Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, Powder Dipper and instructions with load data. Select this die set if you are reloading new or mixed range brass.


If you will be reloading for hunting, or your firearm magazine limits the overall length and prevents your bullet from touching the rifling, we recommend restoring accuracy with the accessory Lee Factory Crimp die.


After full length sizing and firing, you now have brass that is fire formed to your chamber. Consider our neck sizing die for longest case life and best accuracy. Sizes just the neck and requires no case lubrication.


WarningWARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov

 

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Full-length Sizing Die

30/06 Springfield Steel Full Length Sizing Die Complete.

Click here to view parts

WarningWARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go towww.P65Warnings.ca.gov

 

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Factory Crimp Die

Click here to view parts


Lee 30/06 Springfield Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Neck Sizing Die

Click here to view parts


Lee 30/06 Springfield neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.


.002" undersize decap mandrel sold separately.


WarningWARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go towww.P65Warnings.ca.gov

 

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Quick Trim Die

30/06 Quick Trim Die

Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Products specifications
Attribute nameAttribute value
Gun TypeRifle
Cartridge30-06 Springfield

Related products

Picture of 30/06 Springfield Case Length Gauge & Shell Holder

30/06 Springfield Case Length Gauge & Shell Holder

90140

Lee 30/06 Springfield Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Deluxe Case Conditioning Kit, Case Conditioning Kit, or Cutter and Lock Stud.


Trim to length 2.474 to 2.494 inches.


Click here to view parts


$8.00
Picture of Long Charging Adapter

Long Charging Adapter

90194

Click here to view parts

$16.98
Picture of 30 CAL GUIDED DECAPPER

30 CAL GUIDED DECAPPER

91580

30 cal. heavy duty guided decapper.

$5.00
Picture of UNDERSIZE MANDREL .3035

UNDERSIZE MANDREL .3035

90480

(.3035") undersized mandrel for 300 WSM, 7.5x55, 30/06, 30/30, 308 Win, and 300 Win Mag.

$5.00
Picture of Undersized Flash Hole Decap Mandrel .3055 300 AAC Blackout

Undersized Flash Hole Decap Mandrel .3055 300 AAC Blackout

92137
.3055 undersized flash hole decap mandrel for collet necksizing dies: 7.62x39R, 300 AAC Blackout, and 300 HAM'R.
$6.00
Picture of Spline Drive Breech Lock Bushing 4 pack

Spline Drive Breech Lock Bushing 4 pack

90095
Breech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position.
$27.00
Picture of Steel Breech Lock Bushing 2 pack

Steel Breech Lock Bushing 2 pack

90600

Click here to view parts

$16.00
Picture of Spline Drive Breech Lock Bushing 2 pack

Spline Drive Breech Lock Bushing 2 pack

90063

Click here to view parts

$16.00
Picture of Resizing Lube - 1 Tube

Resizing Lube - 1 Tube

90006
$5.98
Existing reviews
ReloaderHSH
5
The more i use this product, the more I like it.  Very easy to setup and work with all the dies. Initially I was hesitant to use, but I've got used to it after reloading 100 .30-06 once fired casings. The product is a very good price and LEE always backs their product.
Harinder | 4/1/2025 6:07 PM
Was this review helpful? Yes No (0/0)
Only registered users can write reviews

Information

Customer service

Contact Us

Copyright © 2025 Lee Precision, Inc. All rights reserved.