44-40 / 44 WCF Dies

Click here to view parts

Lee 44/40 Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee resizing lubricant is required with this die set.

Please note:  Uberti has cut the shoulder in their weapons .050 shorter than SAAMI specs. Shorten resizing die head space .050".

If you find your reloaded .44-40 cartridges will not chamber in your Uberti weapons, it is not the dies. Uberti has decided to cut the .44-40 chambers to a standard other than SAAMI. The shoulder in the chamber is .050" closer to the breech face. If you return the resizing die to the factory, we will adjust it for you at no charge. 

Our address:

Lee Precision
4275 County Road U
Hartford, WI 53027

44-40 Winchester pistol bullet seating die only complete.

There are two crimp shoulders in our pistol Bullet Seating Dies. The first shoulder applies a slight taper crimp and the second shoulder applies a full roll crimp. The closer the die is adjusted to the shell holder the heavier the crimp will be.

Consider completing the bullet seating die with handgun micrometer adjuster. Provides precision bullet seating depth. Easy to read laser engraved divisions represent .001" of an inch. No clicks, just smooth adjustment.

Click here to view parts

Click here to view parts

Lee 44/40 Winchester Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Click here to view parts

44-40, 44/40 limited production quick trim die.

Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.