22 Creedmoor Dies

Click here to view parts

Lee 22 Creedmoor PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, powder dipper and instructions with load data. Select this die set if you are reloading mixed range brass.

LIMITED TIME ONLY, while supplies last: Get a FREE Rifle Bullet Seating Micrometer Adjust Screw with this die set! $20.00 value

Click here to view parts

Lee 22 Creedmoor Micrometer Full Length 2-Die Set. Includes Full Length Sizing Die, Micrometer Bullet Seating Die, Universal Shell Holder, Powder Dipper and instructions with load data. Select this die set if you are reloading mixed range brass.

Nothing helps accuracy more than uniform start pressure, that is, the level of pressure to begin the bullets travel down the bore. Bullet seating depth affects this important pressure. For best accuracy, seat the bullet so the Ogive is touching or nearly touching the rifling. If your firearm has a magazine that limits your seating depth and you are unable to touch the rifling with the bullet, restore accuracy with the accessory Lee Factory crimp die.

Click here to view parts

Incorporates a collet to apply a rifle type crimp to the case. Makes even the most difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. NOTE: This die is not carbide.

Click here to view parts

Lee 22 Creedmoor Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

22 Creedmoor limited production quick trim die.

Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.