Go to your saved Cartridges

REC-Custom Rifle Factory Crimp Die /223 WSSM

Availability: In stock
SKU: REC-595-1
*
*

Send to:
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027

$15.00

The collet-type Factory crimp die can be made for a wide variety of cartridges. Most cartridges will fit into the 7/8 x 14 thread die body. If your cartridge falls within the following parameters it will fit the standard 7/8 x 14 die:

Bullet diameter .172" - .501" (minimum - maximum)
Body diameter .295" - .562" (minimum - maximum)
Case length 1.250" - 2.850" (minimum - maximum)
 

We will need:

Dummy cartridge (a projectile seated in an empty fired and sized case). The dummy cartridge is for testing purposes, so make sure it is within normal dimensional tolerances. *Note to International Customers:  Due to newly enforced shipping regulations as of 2/6/18, we will NOT be able to return your dummy cartridge to you.*

Please send your dummy cartridge, along with your invoice/order ID to:

Lee Precision, Inc.
4275 Highway "U"
Hartford, WI 53027

Current lead time is 6 weeks.

Unable to make the following cartridges:

  • 11mm French (too short)
  • 17 Ackley Bee (too small)
  • 17 Mach IV (too short)
  • 19 Badger (too small)
  • 22 Rim Fire
  • 22 LR (too short)
  • 25 ACP
  • 32 NAA (too short)
  • 22 Rem Jet (too short)
  • 32 S&W Short (too short)
  • 38 S&W
  • 38/45
  • 38 Short Colt
  • 38 Long Colt
  • 41 Long Colt
  • 256 Winchester Magnum
  • 310 Cadet (too short)
  • 460 S&W (you can use the # 90865 Carbide Factory Crimp Die for this cartridge to apply a Factory Crimp and post-size part of the case)
  • 475 Linebaugh
  • 500 Linebaugh (too sort for large series die body and too large for standard series die body)
  • 50 AE (case diameter is too large to fit in the 7/8-14 die and too short for large series as a collet type crimp die. It can not be made as a carbide crimp die because the carbide would end up being too thin to have the necessary strength. If you wish to separate the bullet seating and crimping steps then purchasing a separate seating die body is your best option.)
  • 50 GI (too big)
  • 50/110 Win Express (no shell holder available)
  • 7.62 Model 1895 Russian Nagant Revolver
  • 7.62 x 12
  • 7.62x25 (too small)
  • 7.63 Mauser
  • 7.65mm
  • 7.92x33 Kurz (too small)
  • 50/70 (too large)
  • 50/95 (too large)
  • 56/60 Spencer (too large)
  • 500 Cor Bon
  • 500 S&W (use the # 90931 Collet Style Factory Crimp Die)
  • 510 GNR (too short)
  • 8mm Kurz (too small)
  • 8mm Nambu (too small)
  • 9.4 Dutch Revolver (too short)

 


Dealers/Distributors, receive your pricing when you order 36 pcs. or more


WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.