Lee Precision
220 SWIFT Case Length Gauge & Shell Holder
Lee 220 SWIFT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Deluxe Case Conditioning Kit, Case Conditioning Kit, or Cutter and Lock Stud.
Trim to length 2.185 to 2.205 inches.
Click here to view parts
220 Swift Dies
220 Swift Factory Crimp Die
Click here to view parts
Lee 220 Swift Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
220 Swift Full Length Sizing 3-Die Set ** Black Box **
Click here to view parts
Lee 220 Swift Pacesetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
220 Swift Full Length Sizing Die
220 Swift Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.