Lee Precision
7X57 Mauser Factory Crimp Die
Click here to view parts
Lee 7x57 Mauser Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
**Note: The 7x57 Rimmed Mauser uses the standard 7x57 dies, but will need a different shell holder to hold the case. The Rimmed cases would use a #5 Shell Holder.
7X57 Mauser Full Length Sizing 3-Die Set
Click here to view parts
Lee 7x57 Mauser Pacesetter 3-Die Set includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
**Note: The 7x57 Rimmed Mauser uses the standard 7x57 dies, but will need a different shell holder to hold the case. The Rimmed cases would use a #5 Shell Holder instead of the #2 supplied in the die sets.
7X57 Mauser Full Length Sizing Die
7x57 Mauser Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
7x57 Mauser Quick Trim Die
7X57 Mauser Quick Trim Die
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
