Lee Precision
7.5X54 MAS Full Length Sizing 3-Die Set
Click here to view parts
Lee 7.5x54 French MAS Pacesetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
7.5X55 Factory Crimp Die
Click here to view parts
Lee 7.5x55 Swiss Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7.5X55 Swiss Full Length Sizing 3-Die Set
Click here to view parts
Lee 7.5x55 SWISS PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
7.5X55 Swiss Full Length Sizing Die
7.5x55 Swiss Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
7.5x55 Swiss Quick Trim Die
7.5x55 Swiss (Schmidt-Rubin) Quick Trim Die
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
