Lee Precision
6.5-300 Weatherby Magnum Factory Crimp Die
6.5-300 Weatherby Magnum Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
6.5-300 Weatherby Magnum Full Length Sizing 3-Die Set
Click here to view parts
Lee 6.5-300 Weatherby Mag. Ltd. Production 3-Die Set. Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
6.5-300 Weatherby Magnum Full Length Sizing Die
6.5-300 Weatherby Magnum Steel Full Length Sizing Die Complete.
Click here to view parts
6.5/300 WSM Full Length Sizing 2-Die Set
Click here to view parts
Lee 6.5/300 WSM 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
6.5/300 WSM Full Length Sizing Die
6.5/300 Winchester Short Magnum Steel Full Length Sizing Die Complete.
Click here to view parts
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.