Lee Precision
356-147-TC Double Cavity Mold
Click here to view parts
Produces a .356 diameter 147 grain Truncated Cone nose bullet. 0.65" bullet overall length.
Handles included.
Max COAL in standard 9mm SAAMI Chamber is 1.066"
357 Herrett Factory Crimp Die LTD PROD
Lee 357 Herrett Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
357 Magnum Case Length Gauge & Shell Holder
Trim to length 1.270 to 1.290 inches.
Use with the Deluxe Case Conditioning Kit, Case Conditioning Kit, and Cutter and Lock Stud.
Click here to view parts
357 Magnum Collet Style Factory Crimp Die
Click here to view parts
357 Magnum Collet Style Crimp Die. Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one. NOTE: This die is not carbide.
357 Magnum Lee Loader
Click here to view parts
Note: This kit can also be used to load the 38 Special with the purchase of load data and dipper. The 357 Maximum can not be loaded with this kit.
The Classic Lee Loader neck sizes only. This is not recommended for semi-auto, pump and lever action guns.