Closeouts
Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
FACTORY SECOND 5 Hole Ultimate Tool Carrier
Reconditioned - .324 Custom Bullet Sizer & Punch
Lee .324 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.
Reconditioned - 38 Super / ACP Carbide Factory Crimp Die
Click here to view parts
Lee 38 Super/38 ACP Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
Reconditioned - 308 Winchester Quick Trim Die
308 Winchester Quick Trim Die
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
Reconditioned - 45 ACP Breech Lock Carbide 3-Die Set (Smart Lock Bushings on all dies)
Click here to view parts
Lee 45 ACP Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Reconditioned - 44 Special/Magnum Breech Lock Carbide 3-Die Set (Smart Lock Bushings on all dies)
Click here to view parts
Lee 44 Special / 44 Magnum Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for both the 44 Special and 44 Magnum. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: These dies can be used to reload the 44 Magnum and 445 Super Mag. 44 Magnum reloading data may be purchased here, 445 Super Magnum load data would need to be obtained from your favorite powder manufacturer.
Reconditioned - 9.3x72 R Factory Crimp Die LTD PROD
Lee 9.3x72R Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
Reconditioned - 7MM Express / 280 Remington Full Length Sizing Die
7mm Express / 280 Remington Rifle Steel Full Length Sizing Die Complete.
Click here to view parts
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Factory Second - Breech Lock Hand Press only (WH D11B)
The world's most popular hand press! More convenient than ever, includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Smart Lock Quick Change Bushing included.
Click here to view parts
Reconditioned - 404 Jeffery Large Series Factory Crimp Die
Lee Large series (1 1/4 x 12 thread) 404 Jeffery Factory Crimp Die, used with the Classic Cast Press only
Reconditioned - Inline Die Only 24CAL
Inline Die Only 24 CAL. Works with 6mm and 243 Winchester, bullet diameter .238 to .245.