Closeouts
Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
FACTORY SECOND 5 Hole Ultimate Tool Carrier
Factory Second - 9MM Luger Lee Loader
Click here to view parts
Please note: For this caliber, the Classic Lee Loader full length resizes the cases. For best results, we recommend using brass that has been fired through your firearm only. If you are using mixed range brass, we recommend full length sizing with a reloading press and set of carbide reloading dies.
Flaring Tool is not included in this kit. Be sure to chamfer the inside of the case mouth so the bullet will start easily. The flaring tool can be ordered separately through this link.
Reconditioned - 40 Smith & Wesson Powder Through Expander
Click here to view parts
New - C338-220-1R Double Cavity Mold
Click here to view parts
Handles included.
Bullet Overall Length = 1.035 inches.
Distance from nose of the bullet to the first lube groove = .560 inches.
Reconditioned 50 BMG Large Series Full Length Sizing Die
50 BMG Steel Full Length Sizing Die Complete.
Click here to view parts
Reconditioned - 6mm ARC Quick Trim Die
Click here to view parts
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
Reconditioned - Six Pack Pro Long Index Rod
Index Rod for long rifle (longer than 223 Rem) Six Pack Pro reloading presses.
Reconditioned - Collet Necksizer 6mm ARC
Click here to view parts
Lee 6mm ARC Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.
Recondtioned - 270 Winchester Short Magnum Factory Crimp Die
Click here to view parts
Lee 270 Winchester Short Magnum WSM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
Reconditioned - 308 Winchester or 303 Savage Factory Crimp Die
Click here to view parts
Lee 308 Winchester or 303 Savage Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.