Closeouts
Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
FACTORY SECOND 5 Hole Ultimate Tool Carrier
Reconditioned - 416 Rigby Factory Crimp Die
416 Rigby [1 1/4-12 thread] factory crimp die, used with the Classic Cast Press only.
Factory Second - 9MM Luger Lee Loader
Click here to view parts
Please note: For this caliber, the Classic Lee Loader full length resizes the cases. For best results, we recommend using brass that has been fired through your firearm only. If you are using mixed range brass, we recommend full length sizing with a reloading press and set of carbide reloading dies.
Flaring Tool is not included in this kit. Be sure to chamfer the inside of the case mouth so the bullet will start easily. The flaring tool can be ordered separately through this link.
Reconditioned - #21 X-PRESS Shell Holder
Reconditioned - 6mm ARC Quick Trim Die
Click here to view parts
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
Reconditioned - 7mm Remington Magnum Quick Trim Die
7mm Remington Magnum Quick Trim Die
Use Quick Trim die in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Power Quick Trim.
Factory Second 45 Auto Rim Carbide 3-Die Set
Click here to view parts
Lee 45 Auto Rim Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
