Handgun Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
All molds for pistol calibers are double cavity to speed casting. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
452-230-TC 6 Cavity Mold
Click here to view parts
Produces a .452 diameter 230 grain Truncated Cone nose bullet
Bullet Overall Length = .620 inches.
Distance from nose of the bullet to the first lube groove = .280 inches.
452-230TC Double Cavity Mold
Click here to view parts
Produces a .452 diameter 230 grain truncated cone bullet
Handles included
Bullet Overall Length = .620 inches.
Distance from nose of the bullet to the first lube groove = .280 inches.
452-252-SWC Double Cavity Mold
Click here to view parts
Produces a .452 diameter 252 grain Semi Wad Cutter nose bullet
Handles included
Bullet Overall Length = .665 inches.
Distance from crimp groove to the nose of the bullet = .305 inches.
452-255-RF 6 Cavity Mold
Click here to view parts
Produces a .452 diameter 255 grain round nose bullet
Bullet Overall Length = .635 inches.
Distance from crimp groove to the nose of the bullet = .260 inches.
452-255-RF Double Cavity Mold
Click here to view parts
Produces a .452 diameter 255 grain round nose bullet
Handles included
Bullet Overall Length = .635 inches.
Distance from crimp groove to the nose of the bullet = .260 inches.
454 Casull / 45 Colt Molds
475 Linebaugh Mold
476-400-RF Double Cavity Mold
Click here to view parts
Bullet Overall Length = .890 inches.
Distance from crimp groove to the nose of the bullet = .380 inches.
500 S&W Mold
9mm Makarov Mold
C358-158 SWC 6 Cavity Mold
Click here to view parts
produces a .358 diameter 158 grain Semi Wad Cutter nose bullet.
Ballistic Coefficient .117
Bullet Overall Length = .665 inches
Distance from crimp groove to the nose of the bullet = .250
C358-158-SWC Double Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain Semi Wad Cutter nose bullet.
Handles included.
Bullet Overall Length = .665 inches.
Distance from the crimp groove to the nose of the bullet = .250 inches.