Go to your saved Cartridges

5.7x28mm FN Dies

  1. Picture of 5.7x28 Steel 2-Die Set
    5.7x28 Steel 2-Die Set
    SKU: 90603
    Availability: In stock
    $49.00
  2. Picture of 5.7X28 FN Factory Crimp Die
    5.7X28 FN Factory Crimp Die
    SKU: 90725
    Availability: In stock
    $25.00
  3. Picture of 5.7x28 FN QT DIE
    5.7x28 FN QT DIE
    SKU: 91363
    Availability: In stock
    $20.00
  4. Picture of 5.7X28 FN Full Length Sizing Die
    5.7X28 FN Full Length Sizing Die
    SKU: 91129
    Availability: In stock
    $23.00
  5. Picture of BUL SEAT DIE 5.7X28 FN
    BUL SEAT DIE 5.7X28 FN
    SKU: 91150
    Availability: In stock
    $21.00
Full-Length Sizing 2-Die Set
Full-length Sizing Die
Seating Die
Factory Crimp Die
Quick Trim Die

Full-Length Sizing 2-Die Set

Click here to view parts


Lee 5.7x28 Steel 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and Instructions/Load data.


If you wish to utilize a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set, you will need to purchase the short charging die # 90668.


Lee resizing lubricant is required with this die set.


Winter 2024:


It has come to our attention that 5.7 x 28 brass is now potentially fully annealed from case mouth to rim.  This causes many issues with the reloading process. 

Our suggestion is to use LEE Resizing Lubricant and our FN shell holder. The rims are so soft that they cannot be resized with a standard universal shell holder, as the brass rims deform, and are pushed down into the .260" relief hole, that is used for priming.  We have introduced a FN shell holder #92183 for resizing this brass.  The FN shellholder cannot be used to re-prime brass, you will need to use the standard #15 shellholder to do this.  We have also seen that the primers are staked or crimped into position.  This maybe due to the brass being so soft, that it does not have the ability to hold the primer into position, via a slight press fit.

The quick trim die uses a plastic bushing to provide a slight interference fit on the body of the cartridge to hold it stationary while trimming.  This new brass is so soft, the plastic bushing is deforming the brass.  If this happens to you, return your die body to the factory at the address below, and we will ream the bushing out to the largest allowable dimension to prevent damage to these soft cases.

With your return, please fill out the form here.

Our address:
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027

Full-length Sizing Die

5.7 x 28 FN Steel Full Length Sizing Die Complete.

Click here to view parts

Seating Die

5.7X28 FN bullet seating die only complete

Click here to view parts

Factory Crimp Die

Click here to view parts

Quick Trim Die

Use Lee Quick Trim dies in conjunction with the Deluxe Quick Trim Case Trimmer or Deluxe Powder Quick Trim.

5.7 x 28 FN custom quick trim die overrun available for immediate shipment.


Winter 2024:


It has come to our attention that 5.7 x 28 brass is now potentially fully annealed from case mouth to rim.  This causes many issues with the reloading process. 

The quick trim die uses a plastic bushing to provide a slight interference fit on the body of the cartridge to hold it stationary while trimming.  This new brass is so soft, the plastic bushing is deforming the brass.  If this happens to you, return your die body to the factory at the address below, and we will ream the bushing out to the largest allowable dimension to prevent damage to these soft cases.

With your return, please fill out the form here.

Our address:
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027

Products specifications
Attribute nameAttribute value
Cartridge5.7X28 FN
Gun TypeRifle

Prop 65 Warning

WarningWARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov

 

WarningWARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.