Go to your saved Cartridges

Your Armory

  • Your Armory is empty.

Can't find what you're looking for? Open a ticket and we will help you find it!

360 Buckhammer

New drawing Coming

In 2023, Remington Introduced the 360 Buckhammer. This is nothing more than a necked-up version of the 30-30, shortened to work with 35-caliber bullets.

This round comes very close to duplicating a round Winchester was set to introduce back in the very early 1900s when Remington stole it’s thunder with the introduction of the 35 Remington.

The single and only reason this cartridge exists is to satisfy the asinine restrictions know-nothing folks in positions of authority in various States established requiring that big-game hunting rifles must use straight-walled cases, and sometimes with an additional limitation on case length.

This is just one more example of what happens when people who likely could not find the end of the gun the bullet comes out of to put their finger in the hole are, nevertheless, allowed to establish rules for what is and what is not safe and effective for hunting use. Nothing new to this.

These are the same sort of folks who have long mandated such things as shotguns with slugs only, believing those are somehow far safer than high-power rifles when, no common sporting load of any kind is more dangerous as a ricochet hazard than a shotgun slug is. But, it is what it is.

Ballistically, because it works at 50,000 psi and is almost as long as 30-30 rounds are, the Buckhammer can generate significantly more energy. Therefore, it is entirely adequate for shots on most big game in North America. Limited trajectory is the biggest restricting factor.

Heritage of this case dates to 1879 with the introduction of the 38-50 Ballard case.

The text associated with the cartridge description reflects opinions and conclusions of the author, M.L. (Mic) McPherson. Lee Precision and its employees do not necessarily either agree or disagree with any of his comments. We present these with due deference to his recognized expertise in the firearms field. His acumen extends to handloading and all aspects of ballistics - internal, external, and terminal.
Die Sets
Lee Collet Necksizing 2-Die Set
Lee RGB Die Set
Lee Full-Length Sizing Die Set
92034 (3-Die set)
Lee Breech Lock Die Set
Lee Ultimate 4-Die Set
Lee Loader
Single Dies
Full-Length Sizing Die
Sizing Die
Neck Sizing Die
Undersize Sizing Die
Charging Die
Seating Die
Factory Crimp Die
92035 (Collet Style)
Taper Crimp Die
Inline Bullet Feed Die
Die Accessories
Guided Decapper
Undersized Flash Hole Decapping Mandrel
Undersized Mandrel
Case Conditioning Tools
Case Length Gauge and Shell Holder
Quick Trim Die
Reloader Press (50 RPH)
Hand Press (50 RPH)
Challenger Press (50 RPH)
Classic Cast Press (50 RPH)
Value Turret Press (250 RPH)
Classic Turret Press (250 RPH)
Ultimate Turret Press (250 RPH)
Pro 1000 Press (500+ RPH)
Pro 4000 Press (500+ RPH)
Six Pack Pro Press (500+ RPH)
Shell Plates and Holders
Priming Tool Shell Holder
Universal Press Shell Holder
X-Press Shell Holder (APP)
Pro 1000 Shell Plate
Auto Breech | Pro 4000 Shell Plate
Six Pack Pro Shell Plate
Inline Bullet Feed
Inline Bullet Feed Die
Inline Bullet Feed Kit
Inline Bullet Feed Magazine
Bullet Casting
Classic Bullet Sizing Kit
Breech Lock Bullet Sizer and Punch
Bullet Molds

Challenger III

From $117.00

Ultimate Turret Press

From $320.00

Deluxe APP Press Kit


The Lee Deluxe Automatic Processing Press gives you the same priming convenience found only on expensive progressive reloading presses.


Six Pack Pro Press

From $400.00