Neck Sizing Die Only

Click here to view parts

Lee 223 Remington or 223 Ackley Improved neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersize mandrel sold separately

Click here to view parts

Lee 300 PRC Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersize mandrel sold separately

Click here to view parts

Lee 7mm PRC Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersize mandrel sold separately

Click here to view parts

Lee 22/250 Remington or 22/250 Ackley Improved neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersized decap mandrel sold separately.

Click here to view parts

Lee 243 Winchester neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized flash hole decap mandrel sold separately.

.002" undersize decap mandrel sold separately.

Click here to view parts

Lee 25/06 Remington neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Click here to view parts

Lee 338 Lapua Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only. This die is 1 1/4-12 thread compatible with our Lee Classic Cast Press only.

Note:  If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.

Click here to view parts

Lee 50 BMG Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only. This die is 1 1/4-12 thread compatible with our Lee Classic Cast Press only.

Note:  If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.

click here to view parts

Lee 17 Remington neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Click here to view parts

Lee 204 Ruger neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Click here to view parts

Lee 22 Creedmoor Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Click here to view parts

Lee 22 Hornet neck sizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and extended case life. Sizes just the neck and requires no case lubrication. Recommended for cases that have been fired through your firearm only.

Undersized Flash Hole Mandrel is sold separately

.002" undersize decap mandrel is available as an accessory.

22 K Hornet Collet Necksizing Die can be made on a custom basis. Send in two fired cases and a sample bullet to our factory:

Lee Precision
4275 County Road U
Hartford, WI 53027