Factory Crimp Die Only

Factory Crimp cutaway Lee Factory Crimp Die crimps your bullets in place the same as factory ammo. A collet gently, but firmly squeezes the very end of the case into the crimping groove, exactly the same as factory ammo.
  • Gives a segmented straight crimp, and crimps more firmly than any other tool
  • It is impossible to buckle the case as with regular roll crimp dies
  • Necessary for hunting and combat. Ammunition will be more accurate and better able to withstand rough handling because the bullet is firmly crimped in place.
  • Tests demonstrate that even bullets with no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. Until now, handloaders seated the bullet to touch the rifling to achieve similar results. This is not always possible nor desirable.

The Lee Factory Crimp Die is included at no extra charge with Lee PaceSetter 3-Die set. It's just another added value that only Lee dies offer.

Product Review:

  Carteach0    

17 HORNET 264 WIN MAG 7.5X54 MAS 8X57 MAUSER 458 SOCOM
204 RUGER 6.5 CREEDMOOR 7.62X39 RUSSIAN 8MM LEBEL 458 WIN MAG
22 HORNET 6.5 CARCANO 7.62X54 RUSSIAN 338 WINCHESTER 22/250 ACK IMP
218 BEE 6.5 GRENDEL 30/40 KRAG 338 ULTRA MAG 223 ACK IMP.
222 REMINGTON 6.5 PRC 30/30 WINCHESTER 348 WIN 300 AAC BLACKOUT
223 REMINGTON 6.5X55 MAUSER 300 PRC 350 REM MAG 30/30 ACK IMP
224 VALKYRIE 6.5-300 WHBY MAG 303 SAVAGE 350 LEGEND 6.5/300 WSM
221 FIREBALL 270 WSM 308 WINCHESTER 358 WIN 338/06
22/250 270 WIN 300 WSM 35 REMINGTON 257 ACK IMP
220 SWIFT 6.8 REM SPC 300 SAVAGE 375 RUGER 280 ACK IMP
243 WINCHESTER 7/30 WATERS 30/06 9.3X62 22 TCM
6MM CREEDMOOR 7X57 MAUSER 300 WIN MAG 35 WHELEN 5.7X28 FN
6MM/244 REMINGTON 7X64 BRENNEKE 300 H&H 375 H&H  
243 WSSM 7MM/08 300 WHBY MAG 416 REMINGTON  
25-20 WCF 7MM EXPRESS/280 REM 300 ULTRA MAG 32/20 LARGE SERIES 1 1/4-12
25-45 SHARPS 7MM WSM 7.65 ARG MAUSER 38-40 338 LAPUA
25-303 7MM REM MAG 7.7 JAPANESE 38-55 50 BMG
250 SAVAGE 7MM STW 303 BRITISH 375 WIN  
26 NOSLER 7MM ULTRA MAG 32-40 44/40  
257 ROBERTS 284 WIN 32 WIN SPL 444 MARLIN  
260 REMINGTON 7.35 CARCANO 325 WSM 45/70 GOVERNMENT
25/06 REMINGTON 7.5X55 SWISS 8X56 R HUNGARIAN 450 BUSHMASTER  

Custom over-run cartrdidges available for immediate shipment:

CARTRIDGE CARTRIDGE CARTRIDGE
10.75 x 68 338 Whisper 6.5 Rem Mag
17 Rem Fireball 340 Weatherby 6.5 x 284 Norma
17 Remington 35 Whelen 6.5 x 43
20 Tactical 350 Rem Mag 6.5 x 45
219 Zipper 351 Win Self Loading (WSL) 6.5 x 47 Lapua
22 Nosler 357 Herrett 6.5 x 54 Mauser
22 Savage 358 Hoosier 6.5 x 57 R
221 Fireball 358 Norma Mag 6.5 x 65R RWS
222 Remington Mag 366 TKM 6.5mm PPC
240 Weatherby Mag 375 Blaser Mag 6mm BR Rem or Norma
25-35 375 Raptor 6mm Musgrave
257 Weatherby Mag 375 Rem. Ultra Mag 7.35 Carcano
264 Winchester Mag
375 Socom
7.62 x 40 WT
270 Weatherby
38-56 WCF 7mm WSM
277 Wolverine
40 Sharps Wildcat 8 x 33mm
28 Nosler 401 Winchester Self Loading 8 x 56R
284 Winchester 405 Win 8 x 58R
30 Herrett 41 Mag 8 x 60 S
30/338 416 Ruger 8 x 68 S
300 HAM'R 425 Westley Richards 8.15 x 46 R Schuetzen
300 Rem SAUM 44 Auto Mag 8.5 Messner Mag
30-303 45 Blaser 8.5 x 63
308 Marlin 45/70 Leverevolution 8mm Lebel
308 Norma Mag 458 African Express (2.653" case length) 9.3 x 64
30R Blaser 458 African Express(3.000" case length) 9.3 x 66 Sako
32 Remington 458 Belted Express 9.3 x 72R
32 Winchester Special 458 Lott 9.3 x 74R
32-40 Winchester 45-90 Sharps 9.6 x 53 Lancaster
325 WSM
480 Ruger
33 Winchester 50 Alaskan
338 Blaser Magnum 50 Beowulf LARGE SERIES 1 1/4x12 THREAD
338 FED 510 Kodiak Express * Require Classic Cast Press
338 Marlin Express 6 x 45mm *30-378 Weatherby Mag
338 Rem Ultra Mag 6 x 62 *416 Rigby
338 Spectre 6.5 Carcano *8.5 Messner Mag

For sizes not listed, if you wish to order online, contact us so we can advise if the size you are looking for can be made, we will then give you the ordering link.

Unable to make the following cartridges:

  • 22 Rem Jet (too short)
  • 32 S&W Short
  • 38 S&W
  • 41 Long Colt
  • 257 Winchester Magnum
  • 460 S&W (you can use the # 90865 Carbide Factory Crimp Die for this cartridge to apply a Factory Crimp and post-size part of the case)
  • 475 Linebaugh
  • 50 AE (case diameter is too large to fit in the 7/8-14 die and too short for large series as a collet type crimp die. It can not be made as a carbide crimp die because the carbide would end up being too thin to have the necessary strength. If you wish to separate the bullet seating and crimping steps then purchasing a separate seating die body is your best option.)
  • 7.62 Model 1895 Russian Nagant Revolver
  • 56/60 Spencer
  • 500 S&W (use the # 90931 Collet Style Factory Crimp Die)
  • 8mm Nambu

Products

  •  per page
FACTORY CRIMP DIE 7.5X55

SKU: 90184

FACTORY CRIMP DIE 7.5X55
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 243 WSSM

SKU: 90187

FACTORY CRIMP DIE 243 WSSM
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 300 WSM

SKU: 90331

FACTORY CRIMP DIE 300 WSM
MSRP: $15.98

Quantity

30M1 COLLET CMP DIE

SKU: 90421

30M1 COLLET CMP DIE
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 6.8SPC

SKU: 90735

FACTORY CRIMP DIE 6.8SPC
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 222

SKU: 90816

FACTORY CRIMP DIE 222
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 223

SKU: 90817

FACTORY CRIMP DIE 223
MSRP: $15.98

Quantity
Product Is Out of Stock
Backorder yours today.
Due in Stock: June 19, 2020

FACTORY CRIMP DIE 22/250

SKU: 90818

FACTORY CRIMP DIE 22/250
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 243

SKU: 90819

FACTORY CRIMP DIE 243
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 270

SKU: 90820

FACTORY CRIMP DIE 270
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7MM MAG

SKU: 90821

FACTORY CRIMP DIE 7MM MAG
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 30/30

SKU: 90822

FACTORY CRIMP DIE 30/30
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 308 | 303 SAVAGE

SKU: 90823

FACTORY CRIMP DIE 308 | 303 SAVAGE
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 30/06

SKU: 90824

FACTORY CRIMP DIE 30/06
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 300 WM

SKU: 90825

FACTORY CRIMP DIE 300 WM
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 303B

SKU: 90826

FACTORY CRIMP DIE 303B
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 7.62X39

SKU: 90827

FACTORY CRIMP DIE 7.62X39
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 35 REM

SKU: 90828

FACTORY CRIMP DIE 35 REM
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 22 HORNET & 221 FIREBALL

SKU: 90829

FACTORY CRIMP DIE 22 HORNET & 221 FIREBALL
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 218 BEE

SKU: 90830

FACTORY CRIMP DIE 218 BEE
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 220 SWIFT

SKU: 90831

FACTORY CRIMP DIE 220 SWIFT
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 6MM REM

SKU: 90832

FACTORY CRIMP DIE 6MM REM
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 25/20

SKU: 90833

FACTORY CRIMP DIE 25/20
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 250 SAV

SKU: 90834

FACTORY CRIMP DIE 250 SAV
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 257 ROBT

SKU: 90835

FACTORY CRIMP DIE 257 ROBT
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 25/06

SKU: 90836

FACTORY CRIMP DIE 25/06
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 6.5X55

SKU: 90837

FACTORY CRIMP DIE 6.5X55
MSRP: $15.98

Quantity Out of stock Notify me when back in stock

FACTORY CRIMP DIE 7/30 WAT

SKU: 90838

FACTORY CRIMP DIE 7/30 WAT
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7X57

SKU: 90839

FACTORY CRIMP DIE 7X57
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7MM/08

SKU: 90840

FACTORY CRIMP DIE 7MM/08
MSRP: $15.98

Quantity

  •  per page