Factory Crimp Die Only

Factory Crimp cutaway Lee Factory Crimp Die crimps your bullets in place the same as factory ammo. A collet gently, but firmly squeezes the very end of the case into the crimping groove, exactly the same as factory ammo.
  • Gives a segmented straight crimp, and crimps more firmly than any other tool
  • It is impossible to buckle the case as with regular roll crimp dies
  • Necessary for hunting and combat. Ammunition will be more accurate and better able to withstand rough handling because the bullet is firmly crimped in place.
  • Tests demonstrate that even bullets with no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. Until now, handloaders seated the bullet to touch the rifling to achieve similar results. This is not always possible nor desirable.

The Lee Factory Crimp Die is included at no extra charge with Lee PaceSetter 3-Die set. It's just another added value that only Lee dies offer.

Product Review:

  Carteach0    

CARTRIDGE
17 HORNET 270 WSM 35 REMINGTON 6.5-300 WHBY MAG
204 RUGER 280 ACK IMP 35 WHELEN 6.5X55 MAUSER
218 BEE 284 WIN 350 LEGEND 6.8 REM SPC
22 HORNET 30/06 350 REM MAG 6MM ARC
22 TCM 30/30 ACK IMP 358 WIN 6MM CREEDMOOR
22/250 30/30 WINCHESTER 375 H&H 6MM/244 REMINGTON
22/250 ACK IMP 30/40 KRAG 375 RUGER 7.35 CARCANO
220 SWIFT 300 AAC BLACKOUT 375 WIN 7.5X54 MAS
221 FIREBALL 300 H&H 38-40 7.5X55 SWISS
222 REMINGTON 300 PRC 38-55 7.62X39 RUSSIAN
223 ACK IMP. 300 SAVAGE 416 REMINGTON 7.62X54 RUSSIAN
223 REMINGTON 300 ULTRA MAG 44/40 7.65 ARG MAUSER
224 VALKYRIE 300 WHBY MAG 444 MARLIN 7.7 JAPANESE
243 WINCHESTER 300 WIN MAG 45/70 GOVERNMENT 7/30 WATERS
243 WSSM 300 WSM 450 BUSHMASTER 7MM EXPRESS/280 REM
25/06 REMINGTON 303 BRITISH 458 SOCOM 7MM REM MAG
250 SAVAGE 303 SAVAGE 458 WIN MAG 7MM STW
25-20 WCF 308 WINCHESTER 5.7X28 FN 7MM ULTRA MAG
25-303 32 WIN SPL 50 BMG 7MM WSM
25-45 SHARPS 32/20 6.5 CARCANO 7MM/08
257 ACK IMP 32-40 6.5 CREEDMOOR 7X57 MAUSER
257 ROBERTS 325 WSM 6.5 GRENDEL 7X64 BRENNEKE
26 NOSLER 338 ULTRA MAG 6.5 PRC 8X56 R HUNGARIAN
260 REMINGTON 338 WINCHESTER   8X57 MAUSER
264 WIN MAG 338/06 6.5 WHBY RPM 9.3X62
270 WIN 348 WIN 6.5/300 WSM  
LARGE SERIES 1 1/4-12 338 LAPUA    

Custom over-run cartrdidges available for immediate shipment:

CARTRIDGE

338 Spectre 6 x 62

338 Whisper 6.5 Carcano
10.75 x 68 340 Weatherby 6.5 Rem Mag
17 Rem Fireball 35 Whelen 6.5 x 284 Norma
17 Remington 350 Rem Mag 6.5 x 43
20 Tactical 351 Win Self Loading (WSL) 6.5 x 45

357 Herrett 6.5 x 47 Lapua
22 Nosler 358 Hoosier 6.5 x 54 Mauser

366 TKM 6.5 x 57 R
221 Fireball 375 Blaser Mag 6.5 x 65R RWS
240 Weatherby Mag 6.5mm PPC
25-35
6mm BR Rem or Norma
257 Weatherby Mag 375 Socom 6mm Musgrave
264 Winchester Mag
40 Sharps Wildcat 7.35 Carcano
270 Weatherby
401 Winchester Self Loading 7.62 x 40 WT
28 Nosler 405 Win 7mm WSM
284 Winchester 41 Mag 8 x 33mm
30/338 416 Ruger 8 x 56R
300 HAM'R 425 Westley Richards 8 x 58R
300 Rem SAUM 44 Auto Mag 8 x 60 S
30-303 45 Blaser 8 x 68 S
308 Marlin 45/70 LeverEvolution 8.15 x 46 R Schuetzen
308 Norma Mag 458 African Express (2.653" case length) 8.5 Messner Mag
30R Blaser 458 African Express(3.000" case length) 8.5 x 63
32 Remington 458 Belted Express 8mm Lebel
32 Winchester Special 458 Lott 9.3 x 64
32-40 Winchester 45-90 Sharps 9.3 x 66 Sako
325 WSM 480 Ruger 9.3 x 72R
33 Winchester 50 Alaskan 9.3 x 74R
338 FED 50 Beowulf 9.6 x 53 Lancaster
338 Marlin Express 510 Kodiak Express  
338 Rem Ultra Mag 6 x 45mm  
     
     
LARGE SERIES 1 1/4x12 THREAD *30-378 Weatherby Mag *416 Rigby
* Require Classic Cast Press *300 Win Mag Ackley Improved *8.5 Messner Mag
     

For sizes not listed, if you wish to order online, contact us so we can advise if the size you are looking for can be made, we will then give you the ordering link.

Unable to make the following cartridges:

  • 22 Rem Jet (too short)
  • 32 S&W Short
  • 38 S&W
  • 41 Long Colt
  • 257 Winchester Magnum
  • 460 S&W (you can use the # 90865 Carbide Factory Crimp Die for this cartridge to apply a Factory Crimp and post-size part of the case)
  • 475 Linebaugh
  • 50 AE (case diameter is too large to fit in the 7/8-14 die and too short for large series as a collet type crimp die. It can not be made as a carbide crimp die because the carbide would end up being too thin to have the necessary strength. If you wish to separate the bullet seating and crimping steps then purchasing a separate seating die body is your best option.)
  • 7.62 Model 1895 Russian Nagant Revolver
  • 56/60 Spencer
  • 500 S&W (use the # 90931 Collet Style Factory Crimp Die)
  • 8mm Nambu

Products

  •  per page
FACT CMP 17 HORNET
SKU: 90605
FACT CMP 17 HORNET
MSRP: $20.00
Quantity
FACT CMP 375 RUGER
SKU: 90609
FACT CMP 375 RUGER
MSRP: $20.00
Quantity
FACTORY CRIMP 9.3x62
SKU: 90610
FACTORY CRIMP 9.3x62
MSRP: $15.98
Quantity
FACT CMP 25-45 SHARPS
SKU: 91107
FACT CMP 25-45 SHARPS
MSRP: $20.00
Quantity
FACT CMP 26 NOSLER
SKU: 91163
FACT CMP 26 NOSLER
MSRP: $20.00
Quantity
FACT CMP 450 BUSH
SKU: 91167
FACT CMP 450 BUSH
MSRP: $15.98
Quantity
FACT CMP 224 VALKYRIE
SKU: 91487
FACT CMP 224 VALKYRIE
MSRP: $15.98
Quantity
FACT CMP 6MM CREED
SKU: 91488
FACT CMP 6MM CREED
MSRP: $15.98
Quantity
FACT CMP 25-303
SKU: 91491
FACT CMP 25-303
MSRP: $15.98
Quantity
FACT CMP 6.5 PRC
SKU: 91492
FACT CMP 6.5 PRC
MSRP: $15.98
Quantity
FACT CMP 6.5-300 WHBY MAG
SKU: 91493
FACT CMP 6.5-300 WHBY MAG
MSRP: $15.98
Quantity
FACT CMP 300 PRC
SKU: 91494
FACT CMP 300 PRC
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 6mm ARC
SKU: 91664
FACTORY CRIMP DIE 6mm ARC
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 6.5 WHBY RPM
SKU: 91822
FACTORY CRIMP DIE 6.5 WHBY RPM
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 6.8 WESTERN
SKU: 91830
FACTORY CRIMP DIE 6.8 WESTERN
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 8.6 BLACKOUT
SKU: 91924
FACTORY CRIMP DIE 8.6 BLACKOUT
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 6MM GT
SKU: 91957
FACTORY CRIMP DIE 6MM GT
MSRP: $15.98
Quantity
  •  per page