Factory Crimp Die Only

Factory Crimp cutaway Lee Factory Crimp Die crimps your bullets in place the same as factory ammo. A collet gently, but firmly squeezes the very end of the case into the crimping groove, exactly the same as factory ammo.
  • Gives a segmented straight crimp, and crimps more firmly than any other tool
  • It is impossible to buckle the case as with regular roll crimp dies
  • Necessary for hunting and combat. Ammunition will be more accurate and better able to withstand rough handling because the bullet is firmly crimped in place.
  • Tests demonstrate that even bullets with no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. Until now, handloaders seated the bullet to touch the rifling to achieve similar results. This is not always possible nor desirable.

The Lee Factory Crimp Die is included at no extra charge with Lee PaceSetter 3-Die set. It's just another added value that only Lee dies offer.

Product Review:

  Carteach0    

17 HORNET 264 WIN MAG 7.5X54 MAS 8X57 MAUSER 458 SOCOM
204 RUGER 6.5 CREEDMOOR 7.62X39 RUSSIAN 8MM LEBEL 458 WIN MAG
22 HORNET 6.5 CARCANO 7.62X54 RUSSIAN 338 WINCHESTER 22/250 ACK IMP
218 BEE 6.5 GRENDEL 30/40 KRAG 338 ULTRA MAG 223 ACK IMP.
222 REMINGTON 6.5 PRC 30/30 WINCHESTER 348 WIN 300 AAC BLACKOUT
223 REMINGTON 6.5X55 MAUSER 300 PRC 350 REM MAG 30/30 ACK IMP
224 VALKYRIE 6.5-300 WHBY MAG 303 SAVAGE 350 LEGEND 6.5/300 WSM
221 FIREBALL 270 WSM 308 WINCHESTER 358 WIN 338/06
22/250 270 WIN 300 WSM 35 REMINGTON 257 ACK IMP
220 SWIFT 6.8 REM SPC 300 SAVAGE 375 RUGER 280 ACK IMP
243 WINCHESTER 7/30 WATERS 30/06 9.3X62 22 TCM
6MM CREEDMOOR 7X57 MAUSER 300 WIN MAG 35 WHELEN 5.7X28 FN
6MM/244 REMINGTON 7X64 BRENNEKE 300 H&H 375 H&H  
243 WSSM 7MM/08 300 WHBY MAG 416 REMINGTON  
25-20 WCF 7MM EXPRESS/280 REM 300 ULTRA MAG 32/20 LARGE SERIES 1 1/4-12
25-45 SHARPS 7MM WSM 7.65 ARG MAUSER 38-40 338 LAPUA
25-303 7MM REM MAG 7.7 JAPANESE 38-55 50 BMG
250 SAVAGE 7MM STW 303 BRITISH 375 WIN  
26 NOSLER 7MM ULTRA MAG 32-40 44/40  
257 ROBERTS 284 WIN 32 WIN SPL 444 MARLIN  
260 REMINGTON 7.35 CARCANO 325 WSM 45/70 GOVERNMENT
25/06 REMINGTON 7.5X55 SWISS 8X56 R HUNGARIAN 450 BUSHMASTER  

Custom over-run cartrdidges available for immediate shipment:

CARTRIDGE CARTRIDGE CARTRIDGE
17 Rem Fireball 350 Rem Mag 6.5 x 54 Mauser
17 Remington 351 Win Self Loading (WSL) 6.5 x 43
20 Tactical 357 Herrett 6.5 x 45
219 Zipper 358 Hoosier 6.5 x 47 Lapua
22 Nosler 300 HAM'R 6.5 x 57 R
22 Savage 358 Norma Mag 6.5 x 65R RWS
221 Fireball 366 TKM 6.5 x 284 Norma
222 Remington Mag 375 Blaser Mag 7.35 Carcano
240 Weatherby Mag 375 Rem. Ultra Mag 7.62 x 40 WT
25-35 375 Raptor 7mm WSM
257 Weatherby Mag 375 Socom
8mm Lebel
264 Winchester Mag
38-56 WCF 8 x 33mm
28 Nosler 40 Sharps Wildcat 8 x 56R
270 Weatherby
401 Winchester Self Loading 8 x 58R
277 Wolverine
405 Win 8 x 60 S
284 Winchester 41 Mag 8 x 64 S
30 Herrett 416 Ruger 8 x 68 S
30-303 425 Westley Richards 8.5 Messner Mag
30/338 44 Auto Mag 8.5 x 63
300 Rem SAUM 45 Blaser 8.15 x 46 R Schuetzen
308 Marlin 45-90 Sharps 9.6 x 53 Lancaster
308 Norma Mag 458 African Express (2.653" case length) 9.3 x 64 
30R Blaser 458 African Express (3.000" case length) 9.3 x 66 Sako
32 Remington 458 Belted Express 9.3 x 72R
32-40 Winchester 458 Lott 9.3 x 74R
32 Winchester Special 480 Ruger 10.75 x 68
325 WSM
50 Alaskan  
33 Winchester 50 Beowulf  
338 Blaser Magnum 510 Kodiak Express LARGE SERIES 1 1/4x12 THREAD
* Require Classic Cast Press
338 FED 6 x 62 * 30-378 Weatherby Mag
338 Marlin Express 6 x 45mm  * 416 Rigby
338 Rem Ultra Mag 6mm BR Rem or Norma * 8.5 Messner Mag
338 Spectre 6mm Musgrave  
338 Whisper 6.5 Carcano  
340 Weatherby 6.5 Rem Mag  
35 Whelen 6.5mm PPC  

For sizes not listed, if you wish to order online, contact us so we can advise if the size you are looking for can be made, we will then give you the ordering link.

Unable to make the following cartridges:

  • 22 Rem Jet (too short)
  • 32 S&W Short
  • 38 S&W
  • 41 Long Colt
  • 257 Winchester Magnum
  • 460 S&W (you can use the # 90865 Carbide Factory Crimp Die for this cartridge to apply a Factory Crimp and post-size part of the case)
  • 475 Linebaugh
  • 50 AE (case diameter is too large to fit in the 7/8-14 die and too short for large series as a collet type crimp die. It can not be made as a carbide crimp die because the carbide would end up being too thin to have the necessary strength. If you wish to separate the bullet seating and crimping steps then purchasing a separate seating die body is your best option.)
  • 7.62 Model 1895 Russian Nagant Revolver
  • 56/60 Spencer
  • 500 S&W (use the # 90931 Collet Style Factory Crimp Die)
  • 8mm Nambu

Products

  •  per page
FACTORY CRIMP DIE 7MM EXP

SKU: 90841

FACTORY CRIMP DIE 7MM EXP
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7.62X54 RUS

SKU: 90842

FACTORY CRIMP DIE 7.62X54 RUS
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 30/40 KRA

SKU: 90843

FACTORY CRIMP DIE 30/40 KRA
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 300 SAV

SKU: 90844

FACTORY CRIMP DIE 300 SAV
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 300 WHBY MAG

SKU: 90845

FACTORY CRIMP DIE 300 WHBY MAG
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7.65X53

SKU: 90846

FACTORY CRIMP DIE 7.65X53
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7.7 JAP

SKU: 90847

FACTORY CRIMP DIE 7.7 JAP
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 8X57

SKU: 90848

FACTORY CRIMP DIE 8X57
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 338 WIN / 338-06 A SQUARE

SKU: 90849

FACTORY CRIMP DIE 338 WIN / 338-06 A SQUARE
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 375 H&H

SKU: 90850

FACTORY CRIMP DIE 375 H&H
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 32/20

SKU: 90851

FACTORY CRIMP DIE 32/20
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 38-40

SKU: 90852

FACTORY CRIMP DIE 38-40
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 38-55

SKU: 90853

FACTORY CRIMP DIE 38-55
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 44/40

SKU: 90854

FACTORY CRIMP DIE 44/40
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 444M

SKU: 90855

FACTORY CRIMP DIE 444M
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 45/70

SKU: 90856

FACTORY CRIMP DIE 45/70
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 348 WIN

SKU: 90857

FACTORY CRIMP DIE 348 WIN
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 7mm STW and 7mm Ultra Mag

SKU: 90869

FACTORY CRIMP DIE 7mm STW and 7mm Ultra Mag
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 356-358

SKU: 90904

FACTORY CRIMP DIE 356-358
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 375 WIN

SKU: 90905

FACTORY CRIMP DIE 375 WIN
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 416 REM MAG

SKU: 90906

FACTORY CRIMP DIE 416 REM MAG
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 458 WIN MAG

SKU: 90969

FACTORY CRIMP DIE 458 WIN MAG
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 300 ULTRA MAG

SKU: 90970

FACTORY CRIMP DIE 300 ULTRA MAG
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 260 REM

SKU: 90977

FACTORY CRIMP DIE 260 REM
MSRP: $15.98

Quantity

F CMP DI 300AAC BLKOUT

SKU: 90590

F CMP DI 300AAC BLKOUT
MSRP: $15.98

Quantity

FACT CMP 6.5 CREEDMOOR

SKU: 90704

FACT CMP 6.5 CREEDMOOR
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 204 RUGER

SKU: 90567

FACTORY CRIMP DIE 204 RUGER
MSRP: $15.98

Quantity

FACTORY CRIMP DIE 6.5 GRENDEL

SKU: 90596

FACTORY CRIMP DIE 6.5 GRENDEL
MSRP: $15.98

Quantity

FACT CRMP (LG SERIES) DIE 338 LAPUA

SKU: 90745

FACT CRMP (LG SERIES) DIE 338 LAPUA
MSRP: $50.00

Quantity

FACT CRMP 458 SOCOM

SKU: 90815

FACT CRMP 458 SOCOM
MSRP: $15.98

Quantity

  •  per page