Factory Crimp Die Only

Factory Crimp cutaway Lee Factory Crimp Die crimps your bullets in place the same as factory ammo. A collet gently, but firmly squeezes the very end of the case into the crimping groove, exactly the same as factory ammo.
  • Gives a segmented straight crimp, and crimps more firmly than any other tool
  • It is impossible to buckle the case as with regular roll crimp dies
  • Necessary for hunting and combat. Ammunition will be more accurate and better able to withstand rough handling because the bullet is firmly crimped in place.
  • Tests demonstrate that even bullets with no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. Until now, handloaders seated the bullet to touch the rifling to achieve similar results. This is not always possible nor desirable.

The Lee Factory Crimp Die is included at no extra charge with Lee PaceSetter 3-Die set. It's just another added value that only Lee dies offer.

Product Review:

  Carteach0    

CARTRIDGE
17 HORNET 270 WSM 35 REMINGTON 6MM ARC
204 RUGER 280 ACK IMP 35 WHELEN 6MM CREEDMOOR
218 BEE 284 WIN 350 LEGEND 6MM/244 REMINGTON
22 HORNET 30/06 350 REM MAG 7.35 CARCANO
22 TCM 30/30 ACK IMP 358 WIN 7.5X54 MAS
22/250 30/30 WINCHESTER 375 H&H 7.5X55 SWISS
22/250 ACK IMP 30/40 KRAG 375 RUGER 7.62X39 RUSSIAN
220 SWIFT 300 AAC BLACKOUT 375 WIN 7.62X54 RUSSIAN
221 FIREBALL 300 H&H 38-40 7.65 ARG MAUSER
222 REMINGTON 300 PRC 38-55 7.7 JAPANESE
223 ACK IMP. 300 SAVAGE 416 REMINGTON 7/30 WATERS
223 REMINGTON 300 ULTRA MAG 44/40 7MM EXPRESS/280 REM
224 VALKYRIE 300 WHBY MAG 444 MARLIN 7MM REM MAG
243 WINCHESTER 300 WIN MAG 45/70 GOVERNMENT 7MM STW
243 WSSM 300 WSM 450 BUSHMASTER 7MM ULTRA MAG
25/06 REMINGTON 303 BRITISH 458 SOCOM 7MM WSM
250 SAVAGE 303 SAVAGE 458 WIN MAG 7MM/08
25-20 WCF 308 WINCHESTER 5.7X28 FN 7X57 MAUSER
25-303 32 WIN SPL 6.5 CARCANO 7X64 BRENNEKE
25-45 SHARPS 32/20 6.5 CREEDMOOR 8MM LEBEL
257 ACK IMP 32-40 6.5 GRENDEL 8X56 R HUNGARIAN
257 ROBERTS 325 WSM 6.5 PRC 8X57 MAUSER
26 NOSLER 338 ULTRA MAG 6.5/300 WSM 9.3X62
260 REMINGTON 338 WINCHESTER 6.5-300 WHBY MAG  
264 WIN MAG 338/06 6.5X55 MAUSER  
270 WIN 348 WIN 6.8 REM SPC  
LARGE SERIES 1 1/4-12 338 LAPUA 50 BMG  

Custom over-run cartrdidges available for immediate shipment:

CARTRIDGE
10.75 x 68 32 Remington 401 Winchester Self Loading 6.5 x 54 Mauser
17 Rem Fireball 32 Winchester Special 405 Win 6.5 x 57 R
17 Remington 32-40 Winchester 41 Mag 6.5 x 65R RWS
20 Tactical 325 WSM
416 Ruger 6.5mm PPC
219 Zipper 33 Winchester 425 Westley Richards 6mm BR Rem or Norma
22 Nosler 338 Blaser Magnum 44 Auto Mag 6mm Musgrave
22 Savage 338 FED 45 Blaser 7.35 Carcano
221 Fireball 338 Marlin Express 45/70 Leverevolution 7.62 x 40 WT
222 Remington Mag 338 Rem Ultra Mag 458 African Express (2.653" case length) 7mm WSM
240 Weatherby Mag 338 Spectre 458 African Express(3.000" case length) 8 x 33mm
25-35 338 Whisper 458 Belted Express 8 x 56R
257 Weatherby Mag 340 Weatherby 458 Lott 8 x 58R
264 Winchester Mag
35 Whelen 45-90 Sharps 8 x 60 S
270 Weatherby
350 Rem Mag 480 Ruger 8 x 68 S
277 Wolverine
351 Win Self Loading (WSL) 50 Alaskan 8.15 x 46 R Schuetzen
28 Nosler 357 Herrett
8.5 Messner Mag
284 Winchester 358 Hoosier 510 Kodiak Express 8.5 x 63

358 Norma Mag 6 x 45mm 8mm Lebel
30/338 366 TKM 6 x 62 9.3 x 64
300 HAM'R 375 Blaser Mag 6.5 Carcano 9.3 x 66 Sako
300 Rem SAUM
6.5 Rem Mag 9.3 x 72R
30-303 375 Rem. Ultra Mag 6.5 x 284 Norma 9.3 x 74R
308 Marlin 375 Socom
6.5 x 43 9.6 x 53 Lancaster
308 Norma Mag 38-56 WCF 6.5 x 45  
30R Blaser 40 Sharps Wildcat 6.5 x 47 Lapua  
LARGE SERIES 1 1/4x12 THREAD *30-378 Weatherby Mag *416 Rigby *8.5 Messner Mag
* Require Classic Cast Press      

For sizes not listed, if you wish to order online, contact us so we can advise if the size you are looking for can be made, we will then give you the ordering link.

Unable to make the following cartridges:

  • 22 Rem Jet (too short)
  • 32 S&W Short
  • 38 S&W
  • 41 Long Colt
  • 257 Winchester Magnum
  • 460 S&W (you can use the # 90865 Carbide Factory Crimp Die for this cartridge to apply a Factory Crimp and post-size part of the case)
  • 475 Linebaugh
  • 50 AE (case diameter is too large to fit in the 7/8-14 die and too short for large series as a collet type crimp die. It can not be made as a carbide crimp die because the carbide would end up being too thin to have the necessary strength. If you wish to separate the bullet seating and crimping steps then purchasing a separate seating die body is your best option.)
  • 7.62 Model 1895 Russian Nagant Revolver
  • 56/60 Spencer
  • 500 S&W (use the # 90931 Collet Style Factory Crimp Die)
  • 8mm Nambu

Products

  •  per page
FACTORY CRIMP DIE 7.5X55
SKU: 90184
FACTORY CRIMP DIE 7.5X55
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 243 WSSM
SKU: 90187
FACTORY CRIMP DIE 243 WSSM
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 300 WSM
SKU: 90331
FACTORY CRIMP DIE 300 WSM
MSRP: $15.98
Quantity
30M1 COLLET CMP DIE
SKU: 90421
30M1 COLLET CMP DIE
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 6.8SPC
SKU: 90735
FACTORY CRIMP DIE 6.8SPC
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 222
SKU: 90816
FACTORY CRIMP DIE 222
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 223
SKU: 90817
FACTORY CRIMP DIE 223
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 22/250
SKU: 90818
FACTORY CRIMP DIE 22/250
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 243
SKU: 90819
FACTORY CRIMP DIE 243
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 270
SKU: 90820
FACTORY CRIMP DIE 270
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 7MM MAG
SKU: 90821
FACTORY CRIMP DIE 7MM MAG
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 30/30
SKU: 90822
FACTORY CRIMP DIE 30/30
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 308 | 303 SAVAGE
SKU: 90823
FACTORY CRIMP DIE 308 | 303 SAVAGE
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 30/06
SKU: 90824
FACTORY CRIMP DIE 30/06
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 300 WM
SKU: 90825
FACTORY CRIMP DIE 300 WM
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 303B
SKU: 90826
FACTORY CRIMP DIE 303B
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 7.62X39
SKU: 90827
FACTORY CRIMP DIE 7.62X39
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 35 REM
SKU: 90828
FACTORY CRIMP DIE 35 REM
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 22 HORNET & 221 FIREBALL
SKU: 90829
FACTORY CRIMP DIE 22 HORNET & 221 FIREBALL
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 218 BEE
SKU: 90830
FACTORY CRIMP DIE 218 BEE
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 220 SWIFT
SKU: 90831
FACTORY CRIMP DIE 220 SWIFT
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 6MM REM
SKU: 90832
FACTORY CRIMP DIE 6MM REM
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 25/20
SKU: 90833
FACTORY CRIMP DIE 25/20
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 250 SAV
SKU: 90834
FACTORY CRIMP DIE 250 SAV
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 257 ROBT
SKU: 90835
FACTORY CRIMP DIE 257 ROBT
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 25/06
SKU: 90836
FACTORY CRIMP DIE 25/06
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 6.5X55
SKU: 90837
FACTORY CRIMP DIE 6.5X55
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 7/30 WAT
SKU: 90838
FACTORY CRIMP DIE 7/30 WAT
MSRP: $15.98
Quantity Out of stock Notify me when back in stock
FACTORY CRIMP DIE 7X57
SKU: 90839
FACTORY CRIMP DIE 7X57
MSRP: $15.98
Quantity
FACTORY CRIMP DIE 7MM/08
SKU: 90840
FACTORY CRIMP DIE 7MM/08
MSRP: $15.98
Quantity
  •  per page