Case Length Gauge/Holder

While we manufacture a full line of case length gauges for handgun cartridges, it is not normally necessary to trim handgun cases. These are made for those who are very concernered about overall case length with their handgun cartridges. If you are using light to moderate loads, generally the case will wear out before it needs to be trimmed. If you are using heavy loads or are a person who demands absolute uniformity, the handgun case lenth gauge would be applicable for you.

Standard Case Length Gauges

RIFLE CARTRIDGE   RIFLE CARTRIDGE   RIFLE CARTRIDGE   PISTOL CARTRIDGE
5.7 x 28 FN   270 WIN   300 WIN MAG   32 Smith & Wesson Long
22 Hornet   270 WSM   300 WHBY MAG   9mm Makarov
218 Bee   284 WIN   303 British   9mm Luger
221 Fireball   7 x 57 Mauser   32 Win Special   38 Super
222 REM   7mm/08   32/20 W.C.F.   380 Auto
223 REM   7mm Express/280 Rem.   7.7 Japanese   38 Smith & Wesson
223 WSSM   7mm REM MAG   8 x 57 Mauser   38 Special
22/250   7mm WSM   8x56 Hungarian-Mannlicher   38-55
220 Swift   7 x 64 Brenneke   325 WSM   357 MAG
243 WIN   7.5 Swiss (Schmidt-Rubin)   338 Fed   40 S&W
243 WSSM   7.5 x 54 MAS   338 Lapua   10mm Auto
6mm REM (244 Rem.)   7.62 x 39 Russian   338 WIN MAG   41 MAG
25/20 W.C.F.   7.62 x 54 Russian   35 REM   44/40
25 WSSM   7.65 Mauser (Belgian-Arg.)   35 Whelen   44 Special
250 Savage (250/3000)   30 M1 Carbine   375 WIN   44 MAG
257 Roberts   30/30 WIN   375 H&H or 375 Ultra Mag   45 ACP
25/06 REM   30/40 Krag   444 Marlin   45 Colt
6.5 Carcano   300 AAC Blackout   450 Marlin   454 Casull
6.5 x 55 Mauser   300 Savage   45/70 Government    
6.5 x 284 Win   300 WSM   458 Win Mag   460 S&W
6.5 Creedmoor   308 WIN   * 50 BMG ($20.00)   * 480 Ruger
260 Remington   30/06 Springfield       * 500 S&W
6.8 REM SPC   300 H&H / 300 Rem. Ultra Mag   * Requires Large Cutter   * Requires Large Cutter

Custom Case Length Gauge Overruns Available for Immediate Shipment

RIFLE CARTRIDGE   RIFLE CARTRIDGE   RIFLE CARTRIDGE   HANDGUN CARTRIDGE
26 Nosler   338/06   6 x 47 Lapua   32 ACP
28 Nosler   340 Weatherby Magnum   6mm Creedmoor    32 H&R MAG
219 Zipper   348 Winchester   6mm TCU   32 S&W
222 Rem Mag   350 Rem Magnum   6mm XC   327 Federal Magnum
224 Valkyrie   358 Winchester   6.5 PRC   357 Max
225 Win. Mag.   375 Ruger    6.5 Grendel   357 SIG
240 Weatherby Mag   375 Super Mag   6.5-06   38 Short Colt
25-35 Win   375 Socom   6.5 x 47 Lapua   45 GAP
257 Weatherby Mag   38-40 Win   6.5 x 50 Japanese   50 Action Express (AE)
264 Winchester Mag   40-65   6.5x57 Mauser   7.62 x 25 Tokarev
270 Weatherby Mag   416 Rigby   7mm BR  
280 Ackley Improved   416 Ruger   7mm STW    
30 Herrett   45/70 LeverRevolution   7mm Rem. Ultra Mag    
30/284   450 Bushmaster   7mm Weatherby Mag    
30/378   458 Lott   7.35 Carcano    
308 Marlin   458 Socom   7.62 x 40 Wilson Tactical    
308 Norma Mag   50 Beowulf   7/30 Waters    
32-40 Win   6mm BR Norma or Remington   8mm Remington Mag
   
338 Rem Ultra Mag   6mm PPC   8 x 68mm S    
338 Edge   6 x 45   9.3 x 62     
        9.3 x 74    
             

For sizes not listed, order a custom cartridge hereCurrent lead time for Custom Case Length Gauges is approximately 8 weeks.


Custom case length gauges can be made for cartridges that fit an existing shell holder. We will need to know the desired trim length, and either the bullet diameter or a couple sized sample cases.

While there is really no maximum caliber, the smallest we can make is .22. We can not make anything in 17 cal or 20 cal because it is too small for our cutter to trim. Check out our Quick Trim Case Trimmer system for these smaller cartridges.

UNABLE TO PRODUCE

Order your custom case length gauge here



WarningWARNING: Steel parts in this product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Products

  •  per page
CUSTOM CLG 224 VALK

SKU: 91339

CUSTOM CLG 224 VALK
MSRP: $16.00

Quantity coming soon

CUSTOM CLG 6MM CREED

SKU: 91340

CUSTOM CLG 6MM CREED
MSRP: $16.00

Quantity

CUSTOM CLG 45 GAP

SKU: 91473

CUSTOM CLG 45 GAP
MSRP: $16.00

Quantity

CUSTOM CLG 6.5 PRC

SKU: 91533

CUSTOM CLG 6.5 PRC
MSRP: $16.00

Quantity coming soon

  •  per page