Case Length Gauge/Holder

While we manufacture a full line of case length gauges for handgun cartridges, it is not normally necessary to trim handgun cases. These are made for those who are very concernered about overall case length with their handgun cartridges. If you are using light to moderate loads, generally the case will wear out before it needs to be trimmed. If you are using heavy loads or are a person who demands absolute uniformity, the handgun case lenth gauge would be applicable for you.

Standard Case Length Gauges

RIFLE CARTRIDGE   RIFLE CARTRIDGE   RIFLE CARTRIDGE   PISTOL CARTRIDGE
5.7 x 28 FN   270 WIN   300 WIN MAG   32 Smith & Wesson Long
22 Hornet   270 WSM   300 WHBY MAG   9mm Makarov
218 Bee   284 WIN   303 British   9mm Luger
221 Fireball   7 x 57 Mauser   32 Win Special   38 Super
222 REM   7mm/08   32/20 W.C.F.   380 Auto
223 REM   7mm Express/280 Rem.   7.7 Japanese   38 Smith & Wesson
223 WSSM   7mm REM MAG   8 x 57 Mauser   38 Special
22/250   7mm WSM   8x56 Hungarian-Mannlicher   38-55
220 Swift   7 x 64 Brenneke   325 WSM   357 MAG
243 WIN   7.5 Swiss (Schmidt-Rubin)   338 Fed   40 S&W
243 WSSM   7.5 x 54 MAS   338 Lapua   10mm Auto
6mm REM (244 Rem.)   7.62 x 39 Russian   338 WIN MAG   41 MAG
25/20 W.C.F.   7.62 x 54 Russian   35 REM   44/40
25 WSSM   7.65 Mauser (Belgian-Arg.)   35 Whelen   44 Special
250 Savage (250/3000)   30 M1 Carbine   375 WIN   44 MAG
257 Roberts   30/30 WIN   375 H&H or 375 Ultra Mag   45 ACP
25/06 REM   30/40 Krag   444 Marlin   45 Colt
6.5 Carcano   300 AAC Blackout   450 Marlin   454 Casull
6.5 x 55 Mauser   300 Savage   45/70 Government    
6.5 x 284 Win   300 WSM   458 Win Mag   460 S&W
6.5 Creedmoor   308 WIN   * 50 BMG ($20.00)   * 480 Ruger
260 Remington   30/06 Springfield       * 500 S&W
6.8 REM SPC   300 H&H / 300 Rem. Ultra Mag   * Requires Large Cutter   * Requires Large Cutter

Custom Case Length Gauge Overruns Available for Immediate Shipment

RIFLE CARTRIDGE   RIFLE CARTRIDGE   RIFLE CARTRIDGE   HANDGUN CARTRIDGE
26 Nosler   338/06   6 x 47 Lapua   32 ACP
28 Nosler   340 Weatherby Magnum   6mm Creedmoor    32 H&R MAG
219 Zipper   348 Winchester   6mm TCU   32 S&W
222 Rem Mag   350 Rem Magnum   6mm XC   327 Federal Magnum
224 Valkyrie   350 Legend   6.5 PRC   357 Max
225 Win. Mag.   358 Winchester   6.5 Grendel   357 SIG
240 Weatherby Mag   375 Ruger   6.5-06 A SQUARE   38 Short Colt
25-35 Win   375 Super Mag   6.5 x 47 Lapua   45 GAP
257 Weatherby Mag   375 Socom   6.5 x 50 Japanese   50 Action Express (AE)
264 Winchester Mag   38-40 Win   6.5x57 Mauser   7.62 x 25 Tokarev
270 Weatherby Mag   40-65   7mm BR  
280 Ackley Improved   416 Rigby   7mm STW    
30 Herrett   416 Ruger   7mm Rem. Ultra Mag    
30/284   45/70 LeverRevolution   7mm Weatherby Mag    
30/378   450 Bushmaster   7.35 Carcano    
308 Marlin Express   458 Lott   7.62 x 40 Wilson Tactical    
308 Norma Mag   458 Socom   7/30 Waters    
32-40 Win   50 Beowulf   8mm Remington Mag
   
338 Rem Ultra Mag   6mm BR Norma or Remington   8 x 68mm S    
338 Edge   6mm PPC   9.3 x 62     
    6 x 45   9.3 x 74    
             

For sizes not listed, order a custom cartridge hereCurrent lead time for Custom Case Length Gauges is approximately 8 weeks.


Custom case length gauges can be made for cartridges that fit an existing shell holder. We will need to know the desired trim length, and either the bullet diameter or a couple sized sample cases.

While there is really no maximum caliber, the smallest we can make is .22. We can not make anything in 17 cal or 20 cal because it is too small for our cutter to trim. Check out our Quick Trim Case Trimmer system for these smaller cartridges.

UNABLE TO PRODUCE

Order your custom case length gauge here



WarningWARNING: Steel parts in this product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Products

  •  per page
GAGE/HOLDER 44/40
SKU: 90168
GAGE/HOLDER 44/40
MSRP: $6.50
Quantity
GAGE/HLDR 32S&W LNG
SKU: 90169
GAGE/HLDR 32S&W LNG
MSRP: $6.50
Quantity
GAGE/HOLDER 6.8 REM SPC
SKU: 90189
GAGE/HOLDER 6.8 REM SPC
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 38 SUPER
SKU: 90217
GAGE/HOLDER 38 SUPER
MSRP: $6.50
Quantity
GAGE/HOLDER 338 FED
SKU: 90218
GAGE/HOLDER 338 FED
MSRP: $6.50
Quantity
GAGE/HLDR 5.7X28MMFN
SKU: 90219
GAGE/HLDR 5.7X28MMFN
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 460 S&W
SKU: 90220
GAGE/HOLDER 460 S&W
MSRP: $6.50
Quantity
GAGE/HOLDER 25 WSSM
SKU: 90221
GAGE/HOLDER 25 WSSM
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 325 WSM
SKU: 90222
GAGE/HOLDER 325 WSM
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 6.5/284W
SKU: 90223
GAGE/HOLDER 6.5/284W
MSRP: $6.50
Quantity
GAGE/HOLDER 218 BEE
SKU: 90225
GAGE/HOLDER 218 BEE
MSRP: $6.50
Quantity
GAGE/HLDR 7X64 BRENNEKE
SKU: 90236
GAGE/HLDR 7X64 BRENNEKE
MSRP: $6.50
Quantity
GAUGE/HOLDER 7MM WSM
SKU: 90314
GAUGE/HOLDER 7MM WSM
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAUGE/HOLDER 243 WSSM
SKU: 90389
GAUGE/HOLDER 243 WSSM
MSRP: $6.50
Quantity
GAUGE/HOLDER 223 WSSM
SKU: 90673
GAUGE/HOLDER 223 WSSM
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 9MM MAKAROV
SKU: 90684
GAGE/HOLDER 9MM MAKAROV
MSRP: $6.50
Quantity
GAUGE/HOLDER 458 WIN MA
SKU: 90971
GAUGE/HOLDER 458 WIN MA
MSRP: $6.50
Quantity
GAUGE/HOLDER 35 WHELEN
SKU: 90972
GAUGE/HOLDER 35 WHELEN
MSRP: $6.50
Quantity
GAGE/HOLDER 454 CASULL
SKU: 90992
GAGE/HOLDER 454 CASULL
MSRP: $6.50
Quantity
GAGE/HOLDER 260 REM
SKU: 90993
GAGE/HOLDER 260 REM
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 38-55
SKU: 90994
GAGE/HOLDER 38-55
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 300 AAC BLACKOUT
SKU: 90443
GAGE/HOLDER 300 AAC BLACKOUT
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 32 WIN SPL
SKU: 90491
GAGE/HOLDER 32 WIN SPL
MSRP: $6.50
Quantity
GAGE/HOLDER 338 LAPUA
SKU: 90462
GAGE/HOLDER 338 LAPUA
MSRP: $6.50
Quantity
GAGE/HOLDER 450 MARLIN
SKU: 90554
GAGE/HOLDER 450 MARLIN
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
GAGE/HOLDER 8X56 MANN
SKU: 90589
GAGE/HOLDER 8X56 MANN
MSRP: $6.50
Quantity
GAUGE/HLDR 6.5 CREED
SKU: 90814
GAUGE/HLDR 6.5 CREED
MSRP: $6.50
Quantity Out of stock Notify me when back in stock
  •  per page