Handgun Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
All molds for pistol calibers are double cavity to speed casting. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
C358-200-RF 6 Cavity Mold
Click here to view parts
Produces a gas checked .358 diameter 200 grain round with flat bullet.
Bullet Overall Length = .830 inches.
Distance from crimp groove to the nose of the bullet = .470 inches.
C358-200-RF Double Cavity Mold
Click here to view parts
Produces a gas checked .358 diameter 200 grain round with flat bullet.
Handles included.
Bullet Overall Length = .830 inches.
Distance from crimp groove to the nose of the bullet = .470 inches.
C429-240 SWC 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .429 diameter 240 grain Semi Wad Cutter nose bullet suitable for cartridges like 44 Special, 44 Magnum, and 44/40.
Bullet Overall Length = .740 inches.
Distance from crimp groove to the nose of the bullet = .250 inches.
C429-240-SWC Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .429 diameter 240 grain Semi Wad Cutter nose bullet suitable for cartridges like 44 Spec, 44/40, etc.
Handles included.
Bullet Overall Length = .740 inches.
Distance from crimp groove to the nose of the bullet = .250 inches.
C430-310-RF 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .430 diameter 310 grain round nose bullet suitable for cartridges like 41 Swiss, 44 Special, 44 Magnum, and 44/40.
Bullet Overall Length = .830 inches.
Distance from crimp groove to the nose of the bullet = .320 inches.
C452-300-RF 6 Cavity Mold
Click here to view parts
Produces a .452 diameter 300 grain round nose bullet
Bullet Mold lube and handles sold separately
Bullet Overall Length = .755 inches.
Distance from crimp groove to the nose of the bullet = .285 inches.
C452-300-RF Double Cavity Mold
Click here to view parts
Produces a .452 diameter 300 grain round nose bullet
Handles included
Bullet Overall Length = .755 inches.
Distance from crimp groove to the nose of the bullet = .285 inches.
C501-440-RF Double Cavity Mold
Click here to view parts
Produces a .501 diameter 440 grain round nose bullet
Handles included
Bullet Overall Length = .900 inches.
Distance from crimp groove to the nose of the bullet = .384 inches.
TL314-90-SWC Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .314 diameter 90 grain Semi Wad Cutter nose bullet.
Handles included
Ballistic Coefficient = .100
Bullet Overall Length = .565 inches
Distance from the bullet nose to the top edge of the first driving ring = .220 inches
TL356-124-2R 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .356 diameter 124 grain Round nose bullet
Bullet Overall Length = .595 inches.
Distance from bullet nose to the top edge of the first driving ring = .314 inches.
TL356-124-2R Double Cavity Mold
Click here to view parts
Produces a .356 diameter 124 grain round nose bullet
Handles included
Bullet Overall Length = .595 inches.
Distance from bullet nose to the top edge of the first driving ring = .314 inches.