Lee Classic Cast 50 BMG Press Kit
At last, an affordable way to reload the monster 50 BMG. This kit includes everything you need to start reloading the 50 -- the Lee Classic Cast Press, set of 50 BMG dies, shell holder, ram prime tool and tube of case sizing lube. This kit also includes a shell holder insert, large and small primer arms and Breech Lock Adapter Kit bushing to accept standard 7/8-14 dies, so you can load all your smaller cartridges. All this for less than what others charge for dies alone.
For ease in loading the 50, consider the 50 BMG Loading Block. 9" x 8" block holds 72 cases, continuous flange surrounds tray for easy lifting.
Click here to view parts
Lee 50 BMG Large Series (1 1/4x12 thread) Collet Neck Sizing 2-Die Set, used with the Classic Cast Press only. Includes collet neck sizing die, bullet seating die, load data, and instructions. Select this die set if you are reloading brass that has been fired through your gun only.
Note: If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.
50 BMG shell holder sold separately.
Click here to view parts
Lee 50 BMG Large series (1 1/4x12 thread) 3-die set, used with the Classic Cast Press only. Includes Full Length Sizing Die, Bullet Seating Die (no crimp), Factory Crimp Die and instructions with reloading data. Select this die set if you are reloading mixed range brass.
Note: If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.
50 BMG shell holder sold separately.