This kit features the same components as the 50th Anniversary Kit, but we have replaced the Safety Prime with the Auto Bench Prime and three of the most popular Hand Priming Tool Shell Holders (2, 4 and 19) that work for over 60 cartridges. This kit is for those who prefer to prime off the press. This press includes (1) Smart Lock Quick Change Bushing.
Includes the new Challenger III Press and one Smart Lock quick-change bushing. You get a complete powder handling system, with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel.
Case Preparation Tools include a Value Trim Case Trimmer that allows you to trim directly on your reloading press (order cartridge specific Quick Trim Die separately). Or, use the Cutter and Lock Stud to trim your cases by hand. Order the correct Case Length Gauge for the cartridges you will be loading. Power Grip Shell Holder provides a comfortable grip for holding cases during case trimming and chamfering sessions. An included Chamfer Tool chamfers the inside and outside of the case mouth and a tube of premium Sizing Lube is included. A small and large Primer Pocket-cleaning Tool completes the case preparation package.
Purchased separately, it's a $307.78 value!
Photo note: Challenger III press is shown mounted to the Lee Bench Plate. This product is sold separately.
Challenger III, celebrating forty years. Third generation Challenger features everything that made the Challenger the world’s bestselling single station press. Plus, we have added an ergonomically formed lever allowing even more comfortable operation with no more stooping at the bottom of stroke. Spent primers fall through the ram and collect in a convenient tube. Keeps dirt and grime off the frame and ram, and your workspace clean.
Priming position is moved up front where the action is. And the LEE LEVER PRIME SYSTEM is still instant change with no tools. Say goodbye to time-consuming die adjustments, BREECH LOCK QUICK CHANGE DIE SYSTEM is built in. Change dies instantly with a twist of the wrist; you’ll never have to re-adjust your die. Works with all brands of dies.
Same unbreakable “O” frame design, all steel linkage, and adjustable length lever. This same press would cost you more than twice as much from other manufacturers, and that’s without all of the Challenger’s features.
| Feature | Press Only | 50th Anniversary (pistol reloaders) | Challenger Kit (rifle reloaders) |
| Smart Lock Bushing | done | done | done |
| Lock Ring Wrench | done | done | done |
| Small and Large Priming Arms | done | done | done |
| Case Resizing Lubricant | close | done | done |
| Case Conditioning Combo | close | done | done |
| Value Trim | close | done | done |
| Powder Funnel | close | done | done |
| Perfect Powder Measure | close | done | done |
| Safety Powder Scale | close | done | done |
| Safety Prime- on press priming | close | done | close |
| Auto Bench Prime- workbench priming and 3 of the most popular priming tool shell holders. | close | close | done |
download product instructions
Accessories:
Large & Small Safety Primer Feeder
Bench Plate
| Press includes one Smart Lock quick change bushing. See below to order additional bushings. |
 | Breech Lock Quick Change Bushings Pack of (2) Breech Lock Quick Change Bushings. Allows instant, accurate die changes. Perfect with Lee Lock Rings |
 | Spline Drive Bushings New, easy grip surface allows easy, accurate and fast die installation in your press. Reloading dies are confusingly similar looking, so we anodized and colored the bushings so you can "color code" your dies for quick positive identification. No need for lock rings on your dies with these quick-change bushings. Simply lightly tighten the clamp screw, and split collar will put a vise lock on your die. Loosen the screw, and the die will spin freely. Once set you'll never lose position.
They look so good and work so well, you'll want them for all your dies. For even easier installation, a handy lock ring wrench is included with your Breech Lock Challenger Purchase. Works with Lee Spline drive lock rings and Breech lock bushings. Spline drive Breech Lock Bushings available:
2-pack 90063
4-pack 90095 Smart Lock Bushings No need for lock rings on your dies with these quick-change bushings. Internal o-ring maintains perfect adjustment. No tools required. Once set, you'll never lose position. They look so good and work so well, you'll want them for all your dies. 4- pack 91933 |
|
Customer Product Review
"I just wanted to say that recently I purchased a Lee Challenger press and dies for several of my older military rifles. Along with this I purchased dippers and scales and several more items including "Modern Reloading 2nd Edition Richard Lee" manual.
This was my first experience with reloading and I can honestly say that you guys build a very good quality product. I read your Modern Reloading manual and enjoyed every page. It's nice to see a company take pride in their product as you guys do. Using your products make it very enjoyable to reload, and something I'll do from now on and pass it on to my kids.
My first reloads through my Springfield 1903A3, using your equipment, I was able to consistently shoot 1" groups @ 100yds with this old rifle. Thank you for making such a good product and producing such a good reloading manual to read and follow. You have made a lifetime customer out of me. "
Thank you and Take Care, Donald B. - Talking Rock, GA - March 18, 2017
WARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov
WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
