|
Lee
Turret Press
|
Lee Turret Press Proven design with compound leverage. No spring in this turret design. The turret is locked into a solid steel ring with big rifle bolt type lugs. Patented design puts the lugs on the circumference so there can be no tipping. The linkage is so powerful that the largest magnum cases are sized with ease. Effort required is so small that the usual heavy bench is not essential. The Lee Turret Press has built-in primer catcher, longer stroke, more hand clearance and a comfortable wood grip. Even if you do not need all of these features, why pay more for anything less? In fact, you will want a Lee Turret Press even if you already own a more expensive one.
Four hole turret
By popular demand, the Turret Press is now available with a four station turret. This welcome upgrade allows you to install your Lee Factory Crimp Die, taper crimp die in the press. A simple conversion kit (below) is available if you want to add this feature to your 3-hole press. |
| Lee Three Hole Turret Press |
90496 |
89.98
|
| Lee Four Hole Turret Press w/ Auto Index |
90932 |
95.00
|
|
Here's what one customer had to say about the Lee Turret Press!
Ronald S. from Lake Village, IN:
 I received your reply to my letter concerning a problem I was having with my press regarding the auto indexing. I used the paper shim method you suggested and it works like new. Honestly, I was a bit surprised to receive instruction as to how I could repair it myself. I Really appreciate that very much. As the press is approximately 8 years old and has loaded 24,000 + rounds of ammo and only used three hex ratchets, I can say they will last at least 8,000 + rounds. When the time comes for me to upgrade to a new press, there is no doubt in my mind what brand it will be. So, I would like to thank you for your time in helping me with my problem.
|
  |
| Extra 3 Hole Turret |
90497 |
10.98 |
| Extra 4 Hole Turret |
90269 |
12.98 |
|
Attention 3 Hole Turret Press owners!
Looking for a place to install that Lee Factory Crimp Die? Update your earliest turret press to the new 4-hole design. The update kit includes everything required to convert your turret press to a four position auto index tool. Purchased separately your cost would be over $42.00! Now at special anniversary price! Update Kit includes free 4-Hole Turret.
* If your press is a turret press without an auto-index, you will need to order a new ram, part number TA 2269 ($7.00) if you wish to install the auto-index.
| 20th Anniversary Special |
90933 |
20.00 |
|
 |
 Lee Safety Prime
Makes priming on the press a delight. Never touch the primers from box to shell. Primer flip tray features a CAD designed flipping surface that instantly rights the primers. Change primer size in seconds. Primers are dispensed with a satisfying click of the primer feed trigger.
| Small Primer Feeder |
90995 |
20.00 |
| Large Primer Feeder |
90996 |
20.00 |
| Large & Small |
90997 |
30.00 |
Works on all presses that have the Lever Prime System (LPS)
Update Kit for pre-2006 Lee Turret presses
Everything required to add Lee Safety Prime. Features a new ram with the Lee LPS system, right front column, mounting bracket, and necessary hardware. Also includes both large and small Safety Primer Feed.
| Update Kit for pre-2006 presses |
90042 |
40.00 |
|
|
  |
Lee Auto-Disk Riser
The Lee Auto-Disk Riser allows use of other brands of dies that have extended adjusting screws and provides clearance for the Lee Safety Prime.
|
| Lee Auto-Disk Riser |
90041 |
9.98 |
|
Lee Deluxe 4 Hole Turret Press Kit with Auto Index
|
The rugged Turret Press, along with the Auto Disk Powder Measure, produces top quality pistol ammo in a hurry. A finished round with a few pulls of the lever. Large enough to handle monster belted magnum rifle cases. When it is time to charge calibers, simply lock in a new turret and begin reloading in seconds. In addition to the Turret Press and Auto Disk Powder Measure; the kit includes the Lee Safety Scale, unmatched for sensitivity, a primer pocket cleaner, cutter and lockstud to trim the cases and a chamfer tool to deburr cases after trimming. A set of Lee Dies is all that is required to complete this reloading outfit. All of this at a price that will allow you to pay for your investment in a matter of hours.
This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time.
|
| 4 Hole w/ Auto-Index |
90928 |
145.98 |
|
 |
Lee Classic Turret Press
This press has all the features of the award-winning Turret Press with quality touches that make this the finest, most convenient press to own. The Classic Turret features the solid steel linkage of the Lee Classic Cast. Your first stroke of the hardwood gripped lever will convince you this is one, solid silky smooth press! The sturdy iron base shows its Classic Cast roots.
The long stroke allows rifle cases over three inches long to be loaded using the automatic index. Deactivate the Auto-Index and cases as long as the monster 50 BMG can be loaded. The rigid cast iron frame supports the ram with over 12 square inches of area. The industry's largest ram is drilled completely through to dispense primers in an attached clear PVC tube. Every primer is caught--guaranteed.
Instant change turrets are the same as the famous Lee Turret Press. The Classic Turret uses the new Lee Lever Primer System (LPS) and the Lee Safety Prime tool makes priming on the press a delight.
If you like to own the best, then treat yourself to the Lee Classic Turret. The finest reloading system made.
| Lee Classic Turret Press |
90064 |
129.00 |
|
 Check out what our customers saying about the Lee Classic Turret Press
An interesting article by Joe from Real Guns
|
|
Request paper catalog 90495