Below are surplus, obsolete, discontinued, reconditioned or factory second merchandise available to retail customers only. The only closeout items we have available are listed below, we do not maintain waitlists for specific items.
Buy with confidence, these products carry the same 2 year guarantee as regular products, and you may return any unused product for a refund within 15 days.
New = production overrun.
Factory Second = cosmetic blemish on the product (scratch, paint missing, etc.)
Reconditioned = a product that has left the factory and been returned; may have been used and returned by another customer. Products are fully reconditioned, inspected, cleaned and tested. Scratches, dings, and/or missing paint may present on the products.
358 WINCHESTER bullet seating die only complete.
Click here to view parts
This is an easy adjust dead length bullet seating die. This die does not crimp, it requires factory crimp die.Click here to view parts
Lee 300 HAM'R Very Ltd. Production 3-Die Set. Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Click here to view parts
Lee 40 S&W/10mm Auto Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
Click here to view parts
Lee 6.5/300 WSM 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Click here to view parts
Lee 7mm Express or 280 Remington Pacesetter 3-Die Set includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Click here to view parts
Lee 6.8 Western PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and instructions with load data. Select this die set if you are reloading mixed range brass.
Click here to view parts
Lee 7mm PRC Very Ltd Production PaceSetter 3-Die Set. Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and instructions. Load Data is not yet available for this new cartridge, so a powder dipper is not included. Contact your favorite powder manufacturer for load data. Select this die set if you are reloading mixed range brass.
Reloading brass with undersized flash hole? Undersize flash hole easy x expander is available as an accessory.
Lee .515 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks.