Lee Precision, Inc. Reloading Tools and Equipment: Case Condidtioning Tools

CASE CONDITIONING TOOLS

LEE CASE TRIMMER

The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer.

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length Gauge (Pilot) and Shell Holder must be ordered as Case Length Gauge and shell holder for each caliber. Scroll down for product numbers.

Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit.

Lock Stud Cutter

Cutter & Lock Stud 90110 Serv.Parts 5.98

Large Cutter & Lock Stud must be used for .475 and larger caliber

Lock Stud Large Cutter

Large Cutter & Lock Stud 90401 Serv.Parts 9.98

Chamfer Tool

Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of G.I. brass. Works better than tools costing several times as much.

LEE CHAMFER TOOL 90109 Serv.Parts 2.98

Primer Pocket Cleaner

Double ended design cleans both large and small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one.

LEE POCKET PRIMER CLEANER 90101 Serv.Parts 1.98

Decapper and Base

Easily removes crimped in primers from military cases. Guaranteed unbreakable.

22 CALIBER 90103 Serv.Parts 5.98

30 CALIBER 90102 Serv.Parts 5.98

Decapping Die

An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Tough, almost unbreakable decapper easily removes crimped in primers. One size fits all.

A link to an interesting article by Mark Trope

http://www.surplusrifle.com/shooting2006/tworeloadingtools/index.asp

Lee Decapping Die 90292 Serv.Parts 11.98

Replacement Decapper 90783 Serv.Parts 2.00

Universal Case Expanding Die

Gently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today's high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the larges Ultra Mag. Costs so little and works so well you can't afford to be without one.

A link to an interesting article by Mark Trope

http://www.surplusrifle.com/shooting2006/tworeloadingtools/index.asp

LEE Universal Case Expanding Die 90798 Serv.Parts 14.98

LEE ZIP TRIM

Shown with cutter and chamfer tool not included.

Trimming cases is a fact of life if you reload rifle cases. This task has always been accomplished with tools that require one to hand crank a cutter or resort to an expensive electric unit. The Zip Trim changes the way reloaders prepare cases for reloading. The Zip Trim rotates the case like a lathe. This allows you to trim, chamfer and polish your case without having to remove the case from the tool. Other trimmers hold the case fixed and rotate the cutter.
What really makes the Zip Trim unique is the crank has been thrown away and is replaced with a recoil mechanism like you would find on a small engine. One pull of the Zip Trim cord quickly trims the longest case and just part of a pull chamfers the case mouth. If you like shinny cases touch the spinning case with steel wool or polishing cloth and you get an instant jewel like finish on your case.

Zip Trim 90899 Serv.Parts 24.98

The perfect cutter to use with the Lee Zip trim:

CUTTER only with BALL GRIP 90275 Serv.Parts 6.98

Three Jaw Chuck works with any case from 25 ACP to the largest belted magnums. Three hardened steel jaws gently center the case while the spindle squares and locks the case head. Cases are installed and removed with a fraction of a turn.
Three Jaw Chuck 90608 Serv.Parts 15.98

Optional case spinner spindle with drill shank for use with the Three Jaw chuck, turns any electric drill into a high speed case polisher/lathe. Also works great to hold cases for neck turning or trimming.

Case Spinner Stud 90607 Serv.Parts 3.98

CASE LENGTH GAUGE with SHELLHOLDER 5.50
Specify Caliber From List Of Sizes.

Case Length Gauge

Shellholder

Don't forget, you will need a CUTTER AND LOCK STUD to go along with the CASE LENGTH GAUGE AND SHELLHOLDER!

22 Hornet 90111 Serv.Parts 308 WIN 90139 Serv.Parts

221 Fireball 90112 Serv.Parts 30/06 Springfield 90140 Serv.Parts

222 REM 90113 Serv.Parts 300 H&H / 300 Rem. Ultra Mag 90141 Serv.Parts

223 REM 90114 Serv.Parts 300 WIN MAG 90142 Serv.Parts

223 WSSM 90673 Serv.Parts 300 WHBY MAG 90143 Serv.Parts

22/250 90116 Serv.Parts 303 British 90144 Serv.Parts

220 Swift 90118 Serv.Parts 32/20 W.C.F. 90146 Serv.Parts

243 WIN 90119 Serv.Parts 7.7 Japanese 90115 Serv.Parts

243 WSSM 90389 Serv.Parts 8 x 57 Mauser 90148 Serv.Parts

6mm REM (244 Rem.) 90120 Serv.Parts 338 WIN MAG 90149 Serv.Parts

25/20 W.C.F. 90121 Serv.Parts 35 REM 90150 Serv.Parts

250 Savage (250/3000) 90122 Serv.Parts 35 Whelen 90972 Serv.Parts

257 Roberts 90123 Serv.Parts 375 WIN 90165 Serv.Parts

25/06 REM 90124 Serv.Parts 375 H&H 90164 Serv.Parts

6.5 Carcano 90043 Serv.Parts 444 Marlin 90151 Serv.Parts

6.5 x 55 Mauser 90126 Serv.Parts 45/70 Government 90152 Serv.Parts

260 Remington 90993 Serv.Parts 458 Win Mag 90971 Serv.Parts

6.8 REM SPC 90189 Serv.Parts 32 Smith & Wesson Long 90169 Serv.Parts

270 WIN 90128 Serv.Parts 9mm Makarov 90684 Serv.Parts

270 WSM 90117 Serv.Parts 9mm Luger 90153 Serv.Parts

284 WIN 90129 Serv.Parts 380 Auto 90155 Serv.Parts

7 x 57 Mauser 90130 Serv.Parts 38 Smith & Wesson 90156 Serv.Parts

7mm/08 90167 Serv.Parts 38 Special 90157 Serv.Parts

7mm Express/280 Rem. 90166 Serv.Parts 38-55 90994 Serv.Parts

7mm REM MAG 90131 Serv.Parts 357 MAG 90158 Serv.Parts

7mm WSM 90314 Serv.Parts 40 S&W 90154 Serv.Parts

7 x 64 Brenneke 90236 Serv.Parts 10mm Auto 90127 Serv.Parts

7.5 Swiss (Schmidt-Rubin) 90132 Serv.Parts 41 MAG 90159 Serv.Parts

7.5 x 54 MAS 90051 Serv.Parts 44/40 90168 Serv.Parts

7.62 x 39 Russian 90133 Serv.Parts 44 Special 90160 Serv.Parts

7.62 x 54 Russian 90147 Serv.Parts 44 MAG 90161 Serv.Parts

7.65 Mauser (Belgian-Arg.) 90134 Serv.Parts 45 ACP 90162 Serv.Parts

30 M1 Carbine 90135 Serv.Parts 45 Colt 90163 Serv.Parts

30/30 WIN 90136 Serv.Parts 454 Casull 90992 Serv.Parts

30/40 Krag 90137 Serv.Parts 480 Ruger 90018 Serv.Parts

300 Savage 90138 Serv.Parts 500 S&W 90019 Serv.Parts

300 WSM 90034 Serv.Parts 50 BMG ($20.00) 90010 Serv.Parts

Requires Large Cutter

Unlisted case length gauges can be custom made, please check out our custom services page.

Every Lee Reloading Tool is unconditionally guaranteed for two full years.

Back to Top

Lee Dies | Large Series Dies | Rifle Full Length Dies | Pistol Dies | Crimp Dies
Collet Dies | Deluxe Rifle Dies | Bullet Molds | Lube and Sizing | Melters
Reloading Presses | Press Kits | Turret Press | Classic Turret Press | Classic Cast
Pro 1000 | Load Master | Lee Load All | Case Conditioning Tools | Priming Tools
Disk Powder Measure | Perfect Powder Measure
Lee Aniversary Kit | Deluxe Turret Press Kit | Lee Loader
Shooter Program | Modern Reloading | Apparel | Surplus Items

Request paper catalog 90495

4275 HIGHWAY U
HARTFORD WISCONSIN 53027
262-673-3075 Voice
262-673-9273 FAX

For product and ordering questions, please review our Frequently Asked Questions page.

Download the Lee Precision products list. products.txt 84K
Download the Lee Precision bill of materials. parts.txt approximately 700K
Netscape users hold down the SHIFT key while you click on the file name above.
MSIE users click the right mouse button on the file name.
MAC users can click on the file name and hold - then choose to download.

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997

Back to Top

Hosted by Pictor Design This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0 Direct website questions to the Webmaster http://www.leeprecision.com Revised Published 25-Aug-1997

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997